P0201 2014 GMC Sierra Code - Cylinder 1 Injector Control Circuit
Quick Answer
The Engine Control Module (ECM) supplies voltage to each fuel injector on the high control circuits. Common causes include Faulty Fuel Injector 1, Fuel Injector 1 harness is open or shorted, Fuel Injector 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0201 2014 GMC Sierra indicates Cylinder 1 Injector Control Circuit.
- Common causes
- Common causes include Faulty Fuel Injector 1, Fuel Injector 1 harness is open or shorted, Fuel Injector 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0201 2014 GMC Sierra Description
What are the Possible Causes of the DTC P0201 2014 GMC Sierra?
- Faulty Fuel Injector 1
- Fuel Injector 1 harness is open or shorted
- Fuel Injector 1 circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0201 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0201 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0201 2014 GMC Sierra code?
Need more information on how to fix the P0201 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0201 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0201 2014 GMC Sierra Code
What does OBDII code P0201 mean for a 2014 GMC Sierra?
P0201 indicates a problem with the cylinder 1 injector control circuit, meaning the engine control module (ECM) detected an issue with the electrical signal to the injector.
What are the symptoms of code P0201 in a 2014 GMC Sierra?
Common symptoms include rough idling, misfires, reduced engine performance, poor fuel efficiency, and the check engine light turning on.
What causes OBDII code P0201 in a 2014 GMC Sierra?
Possible causes include a faulty fuel injector, damaged wiring or connectors in the injector circuit, a bad ECM, or corrosion in the electrical connections.
Can I drive my 2014 GMC Sierra with a P0201 code?
While the vehicle may still be drivable, continued operation can cause further damage to the engine or catalytic converter. It’s best to address the issue promptly.
How do I diagnose code P0201 on a 2014 GMC Sierra?
Start by inspecting the wiring and connectors for cylinder 1’s injector, checking for damage or corrosion. Test the injector itself and ensure the ECM is sending the proper signal.
How can I fix code P0201 on my 2014 GMC Sierra?
Repairs may involve replacing the faulty injector, repairing or replacing damaged wiring or connectors, cleaning corroded connections, or replacing the ECM if necessary.
How much does it cost to repair code P0201 on a 2014 GMC Sierra?
Repair costs vary depending on the issue, but replacing a fuel injector typically costs $100-$300 for parts and labor, while ECM replacement can be $500-$1,200.
Can a dirty fuel injector cause code P0201 in a 2014 GMC Sierra?
Yes, a clogged or dirty injector can disrupt the fuel delivery process and trigger code P0201. Cleaning or replacing the injector may resolve the issue.
Will resetting the ECM clear the P0201 code in a 2014 GMC Sierra?
Resetting the ECM may clear the code temporarily, but if the underlying problem isn’t fixed, the code will return. Proper diagnosis and repair are necessary.
What tools are needed to diagnose P0201 on a 2014 GMC Sierra?
You’ll need a scan tool or OBDII code reader, a multimeter for electrical testing, and basic hand tools to inspect and repair wiring or replace the injector.
Discuss the causes and fixes for P0201 2014 GMC Sierra OBDII Code
Code P0201 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
