P0192 Buick Code - Fuel Rail Pressure Sensor Circuit Low Input
Quick Answer
The Engine Control Module (ECM) uses the Fuel Rail Pressure (FRP) sensor to constantly adjust the high-pressure fuel pump's feed rate so that the ideal pressure is permanently maintained in the high-pressure section (between the high-pressure fuel pump and the injectors) by means of closed-loop control. Common causes include Low or no fuel, Faulty Fuel Rail Pressure (FRP) Sensor, Fuel Rail Pressure harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0192 Buick indicates Fuel Rail Pressure Sensor Circuit Low Input.
- Common causes
- Common causes include Low or no fuel, Faulty Fuel Rail Pressure (FRP) Sensor, Fuel Rail Pressure harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0192 Buick Description
What are the Possible Causes of the DTC P0192 Buick?
- Low or no fuel
- Faulty Fuel Rail Pressure (FRP) Sensor
- Fuel Rail Pressure harness is open or shorted
- Fuel Rail Pressure circuit poor electrical connection
- Faulty Fuel Pump
How to Fix the DTC P0192 Buick?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0192 Buick code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0192 Buick code?
Need more information on how to fix the P0192 Buick code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0192 Buick code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0192 Buick Code
1. What are the common symptoms of OBDII code P0192 in a Buick related to the fuel rail pressure sensor circuit?
Symptoms may include poor engine performance, rough idling, decreased fuel efficiency, and in some cases, the vehicle may go into limp mode.
2. What are the possible causes of the P0192 code in a Buick?
Possible causes include a faulty fuel rail pressure sensor, issues with the wiring or connectors in the sensor circuit, fuel pressure regulator problems, or a malfunctioning powertrain control module (PCM).
3. How can I diagnose the P0192 code in my Buick?
Diagnosis typically involves using a scan tool to read the code, checking the sensor's wiring and connectors for any damage or loose connections, testing the sensor's voltage, and verifying fuel pressure levels.
4. Can a dirty fuel filter cause the P0192 code to trigger in a Buick?
Yes, a clogged or dirty fuel filter can restrict fuel flow and affect the fuel pressure sensor readings, potentially leading to the P0192 trouble code.
5. What are some repair tips for fixing the P0192 code in a Buick?
Repair tips may include inspecting and cleaning the fuel rail pressure sensor, replacing a faulty sensor, repairing any damaged wiring or connectors, checking and replacing the fuel filter if necessary, and clearing the trouble code.
6. Is it safe to continue driving with the P0192 code illuminated in a Buick?
It is not recommended to continue driving with the P0192 code present, as it can lead to further engine problems and potential damage if left unresolved.
7. How much does it typically cost to repair the P0192 code in a Buick?
The cost of repairs can vary depending on the specific cause of the code, but it may range from $100 to $300 for parts and labor.
8. Can I reset the P0192 code in my Buick using an OBDII scanner?
Yes, you can use an OBDII scanner to reset the trouble code after making the necessary repairs to address the underlying issue triggering the P0192 code.
9. Will the P0192 code cause my Buick to fail an emissions test?
Yes, the presence of the P0192 trouble code typically indicates an emissions-related issue, which may cause the vehicle to fail an emissions test until the problem is resolved.
10. How often does the fuel rail pressure sensor need to be replaced in a Buick experiencing the P0192 code?
The fuel rail pressure sensor may not need frequent replacement unless it fails or malfunctions due to wear and tear, electrical issues, or other factors triggering the P0192 trouble code.
Discuss the causes and fixes for P0192 Buick OBDII Code
Code P0192 Buick comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
