P0191 2003 Ford F150 Code - Fuel Rail Pressure Sensor Circuit Range/Performance
Quick Answer
The Fuel Rail Pressure (FRP) Sensor is a diaphragm strain gauge device. Common causes include Low or no fuel, Faulty Fuel Rail Pressure (FRP) Sensor, FRP harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0191 2003 Ford F150 indicates Fuel Rail Pressure Sensor Circuit Range/Performance.
- Common causes
- Common causes include Low or no fuel, Faulty Fuel Rail Pressure (FRP) Sensor, FRP harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0191 2003 Ford F150 Description
The FRP sensor is located on the fuel rail and provides a feedback signal to indicate the fuel rail pressure to the Powertrain Control Module (PCM). The PCM uses the FRP signal to command the correct injector timing and pulse width for correct fuel delivery at all speed and load conditions. The FRP sensor, along with the fuel volume regulator (part of the fuel injection pump), forms a closed loop fuel pressure control system. An electrically faulted FRP sensor results in the deactivation of the fuel injection pump. Fuel pressure to injectors is then provided only by the FP module. When the fuel injection pump is de-energized and the injectors are active, the fuel rail pressure is approximately 70 kPa (10 psi) lower than FP module pressure due to the pressure drop across the fuel injection pump. Thus, if the FP module pressure is 448 kPa (65 psi), then the fuel rail pressure would be approximately 379 kPa (55 psi) if the injectors are active.
What are the Possible Causes of the DTC P0191 2003 Ford F150?
- Low or no fuel
- Faulty Fuel Rail Pressure (FRP) Sensor
- FRP harness is open or shorted
- FRP circuit poor electrical connection
- Faulty Fuel Pump
How to Fix the DTC P0191 2003 Ford F150?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
A FRP PID value during KOER of 138 kpa (20 psi) and 413 kpa (60 psi) for gasoline or 586 kpa (85 psi) and 725 kpa (105 psi) for natural gas vehicles (NG) is acceptable.
User Submitted Video
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0191 2003 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0191 2003 Ford F150 code?
Need more information on how to fix the P0191 2003 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0191 2003 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0191 2003 Ford F150 Code
1. What are the common symptoms of OBDII code P0191 on a 2003 Ford F150?
- Common symptoms include rough idling, engine misfires, loss of power, poor fuel efficiency, and the illumination of the Check Engine light.
2. What does the OBDII code P0191 indicate on a 2003 Ford F150?
- The code P0191 indicates a problem with the Fuel Rail Pressure Sensor Circuit Range/Performance in the fuel system.
3. What are the possible causes of OBDII code P0191 on a 2003 Ford F150?
- Possible causes include a faulty fuel rail pressure sensor, issues with the fuel pump, clogged fuel filter, wiring or connector problems, or a problem with the fuel pressure regulator.
4. How can I diagnose the OBDII code P0191 on my 2003 Ford F150?
- Diagnosing the code involves checking the fuel rail pressure sensor and its wiring, inspecting the fuel pump and fuel filter, and testing the fuel pressure regulator for proper operation.
5. Can I still drive my 2003 Ford F150 with OBDII code P0191?
- It is not recommended to drive with the code P0191 present, as it can lead to poor engine performance and potential damage to the fuel system. It is best to address the issue promptly.
6. How can I repair OBDII code P0191 on my 2003 Ford F150?
- Repairing the code may involve replacing the fuel rail pressure sensor, addressing any fuel system issues, fixing wiring or connector problems, and resetting the Check Engine light.
7. Will resetting the Check Engine light fix OBDII code P0191 on a 2003 Ford F150?
- Simply resetting the light will not fix the underlying issue causing the code. It is important to diagnose and address the root cause of the problem to prevent it from recurring.
8. Is OBDII code P0191 a common issue in 2003 Ford F150 vehicles?
- While not extremely common, OBDII code P0191 can occur in 2003 Ford F150 vehicles due to various factors affecting the fuel system components.
9. Can a DIY enthusiast fix OBDII code P0191 on a 2003 Ford F150?
- Depending on the DIY enthusiast's skill level and access to tools, it is possible to address OBDII code P0191 by following repair guides and using proper diagnostic equipment.
10. How much does it typically cost to repair OBDII code P0191 on a 2003 Ford F150?
- The cost of repairing OBDII code P0191 can vary depending on the specific issue causing the code, but it may range from $100 to $500 or more, including parts and labor.
Discuss the causes and fixes for P0191 2003 Ford F150 OBDII Code
Code P0191 2003 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
