P0183 2011 Nissan Altima Sedan Code - Fuel Temperature Sensor Circuit High Input
Quick Answer
The fuel tank temperature sensor is used to detect the fuel temperature inside the fuel tank. Common causes include Faulty Fuel Temperature Sensor, Fuel Temperature Sensor harness is open or shorted, Fuel Temperature Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0183 2011 Nissan Altima Sedan indicates Fuel Temperature Sensor Circuit High Input.
- Common causes
- Common causes include Faulty Fuel Temperature Sensor, Fuel Temperature Sensor harness is open or shorted, Fuel Temperature Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0183 2011 Nissan Altima Sedan Description
What are the Possible Causes of the DTC P0183 2011 Nissan Altima Sedan?
- Faulty Fuel Temperature Sensor
- Fuel Temperature Sensor harness is open or shorted
- Fuel Temperature Sensor circuit poor electrical connection
How to Fix the DTC P0183 2011 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0183 2011 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0183 2011 Nissan Altima Sedan code?
Need more information on how to fix the P0183 2011 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0183 2011 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0183 2011 Nissan Altima Sedan Code
1. What does the OBDII code P0183 indicate on a 2011 Nissan Altima Sedan?
The P0183 code indicates that the fuel temperature sensor in your vehicle is reporting a voltage input that is higher than the expected range, suggesting a potential issue with the sensor or its circuit.
2. What symptoms might I notice if my 2011 Nissan Altima Sedan has the P0183 code?
Symptoms can include poor fuel economy, erratic engine performance, and possibly a check engine light. In some cases, there may be no noticeable symptoms beyond the illuminated check engine light.
3. What could cause the P0183 code to appear on my 2011 Nissan Altima Sedan?
Common causes include a faulty fuel temperature sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module.
4. How can I fix the P0183 code on my 2011 Nissan Altima Sedan?
Repairing this code could involve replacing the faulty fuel temperature sensor, repairing damaged wires or connectors in the sensor’s circuit, or in rare cases, replacing or reprogramming the engine control module.
5. Is it safe to drive my 2011 Nissan Altima Sedan with the P0183 code?
While you may be able to drive with this code without immediate issues, it’s advisable to address the problem soon to avoid potential long-term damage to the engine or fuel system.
6. How do I locate the fuel temperature sensor in my 2011 Nissan Altima Sedan?
The fuel temperature sensor is typically located inside the fuel tank attached to the fuel pump or fuel sending unit. Accessing it usually requires removing the fuel tank or accessing an in-tank maintenance panel.
7. What tools are needed to diagnose the P0183 code in a 2011 Nissan Altima Sedan?
You'll need a diagnostic scan tool to read the code and clear it from the system after repairs. A multimeter may also be necessary to test the sensor and wiring integrity.
8. Could the P0183 code affect the fuel efficiency of my 2011 Nissan Altima Sedan?
Yes, since the fuel temperature sensor impacts how the engine control module calculates fuel delivery, a malfunctioning sensor could lead to decreased fuel efficiency.
9. What steps should I take to confirm the P0183 code before starting repairs?
First, use an OBDII scanner to confirm the presence of the P0183 code. Next, visually inspect the sensor and its wiring for any obvious damage. You can also use a multimeter to check the sensor’s resistance and compare it to manufacturer specifications.
10. How often does the fuel temperature sensor typically need to be replaced in a 2011 Nissan Altima Sedan?
The fuel temperature sensor does not have a regular replacement interval and should only need to be replaced if it fails or if diagnostic testing indicates a malfunction.
Discuss the causes and fixes for P0183 2011 Nissan Altima Sedan OBDII Code
Code P0183 2011 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
