AutoCodes – Ford – P0183 2010 Ford Fusion

P0183 2010 Ford Fusion Code - Engine Fuel Temperature Sensor 'A' Circuit High Input

Quick Answer

The comprehensive component monitor (CCM) monitors the Engine Fuel Temperature (EFT) Sensor circuit to the Powertrain Control Module (PCM) for low and high voltage. Common causes include Open circuit to fuel temperature sensor, Open or short to voltage in the harness, Incorrect harness connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0183 2010 Ford Fusion indicates Engine Fuel Temperature Sensor 'A' Circuit High Input.
Common causes: Common causes include Open circuit to fuel temperature sensor, Open or short to voltage in the harness, Incorrect harness connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,311

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0183 2010 Ford Fusion Description

The comprehensive component monitor (CCM) monitors the Engine Fuel Temperature (EFT) Sensor circuit to the Powertrain Control Module (PCM) for low and high voltage. If voltage were to fall below or exceed a calibrated limit and amount of time during testing, the test will fail. Open or short in harness. Low ambient temperature operation.

OBDII Code P0183 2010 Ford Fusion - Engine Fuel Temperature Sensor 'A' Circuit High Input - AutoCodes.com — P0183 2010 Ford Fusion Code - Engine Fuel Temperature Sensor 'A' Circuit High Input

What does this mean?

What are the Possible Causes of the DTC P0183 2010 Ford Fusion?

Open circuit to fuel temperature sensor
Open or short to voltage in the harness
Incorrect harness connection
Damaged fuel temperature sensor

How to Fix the DTC P0183 2010 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0183 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0183 2010 Ford Fusion code?

Need more information on how to fix the P0183 2010 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0183 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0183 2010 Ford Fusion Code

1. What are the common symptoms of OBDII code P0183 in a 2010 Ford Fusion?

The common symptoms of OBDII code P0183 in a 2010 Ford Fusion include engine stalling, rough idling, decreased fuel efficiency, and the illumination of the check engine light.

2. What does the OBDII code P0183 for a 2010 Ford Fusion indicate?

The OBDII code P0183 for a 2010 Ford Fusion indicates a problem with the Engine Fuel Temperature Sensor 'A' Circuit, specifically a high input signal.

3. What are the possible causes of OBDII code P0183 in a 2010 Ford Fusion?

Possible causes of OBDII code P0183 in a 2010 Ford Fusion include a faulty fuel temperature sensor, damaged wiring or connectors, a corroded sensor connection, or issues with the sensor circuit.

4. How can I diagnose the OBDII code P0183 in my 2010 Ford Fusion?

To diagnose OBDII code P0183 in a 2010 Ford Fusion, you can use an OBDII scanner to retrieve the code, visually inspect the fuel temperature sensor and its wiring, check for any loose connections, and perform a resistance test on the sensor.

5. Can I drive my 2010 Ford Fusion with OBDII code P0183?

It is not recommended to drive your 2010 Ford Fusion with OBDII code P0183, as it can lead to engine performance issues and potential damage. It's best to address the issue promptly to avoid further complications.

6. How do I repair OBDII code P0183 in my 2010 Ford Fusion?

To repair OBDII code P0183 in a 2010 Ford Fusion, you may need to replace the faulty fuel temperature sensor, repair or replace damaged wiring or connectors, clean any corroded connections, or reset the engine control module.

7. Are there any specific maintenance tips to prevent OBDII code P0183 in my 2010 Ford Fusion?

Regularly checking and maintaining the fuel temperature sensor, ensuring proper wiring connections, and keeping the sensor area clean from debris can help prevent OBDII code P0183 in a 2010 Ford Fusion.

8. How urgent is it to address OBDII code P0183 in my 2010 Ford Fusion?

It is recommended to address OBDII code P0183 in a 2010 Ford Fusion as soon as possible to prevent potential engine performance issues, decreased fuel efficiency, and further damage to the vehicle.

9. Can a DIY enthusiast fix OBDII code P0183 in a 2010 Ford Fusion?

A DIY enthusiast with the necessary tools, knowledge, and experience can potentially fix OBDII code P0183 in a 2010 Ford Fusion by following repair guides or consulting with automotive resources.

10. Is it necessary to reset the check engine light after repairing OBDII code P0183 in my 2010 Ford Fusion?

After repairing OBDII code P0183 in a 2010 Ford Fusion, it is advisable to reset the check engine light using an OBDII scanner to clear the stored fault code and ensure the issue has been resolved.