AutoCodes – Ford – P0182 2011 Ford Fusion

P0182 2011 Ford Fusion Code - Engine Fuel Temperature Sensor 'A' Circuit Low Input

Quick Answer

The comprehensive component monitor (CCM) monitors the Engine Fuel Temperature (EFT) Sensor circuit to the Powertrain Control Module (PCM) for low and high voltage. Common causes include Short in the harness, VREF open or short, Low ambient temperature operation. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0182 2011 Ford Fusion indicates Engine Fuel Temperature Sensor 'A' Circuit Low Input.
Common causes: Common causes include Short in the harness, VREF open or short, Low ambient temperature operation.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,027

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0182 2011 Ford Fusion Description

The comprehensive component monitor (CCM) monitors the Engine Fuel Temperature (EFT) Sensor circuit to the Powertrain Control Module (PCM) for low and high voltage. If voltage were to fall below or exceed a calibrated limit and amount of time during testing, the test will fail. Open or short in harness. Low ambient temperature operation.

OBDII Code P0182 2011 Ford Fusion - Engine Fuel Temperature Sensor 'A' Circuit Low Input - AutoCodes.com — P0182 2011 Ford Fusion Code - Engine Fuel Temperature Sensor 'A' Circuit Low Input

What does this mean?

What are the Possible Causes of the DTC P0182 2011 Ford Fusion?

Short in the harness
VREF open or short
Low ambient temperature operation
Incorrect harness connection
Damaged fuel temperature sensor

How to Fix the DTC P0182 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0182 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0182 2011 Ford Fusion code?

Need more information on how to fix the P0182 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0182 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0182 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P0182 in a 2011 Ford Fusion?

The common symptoms of code P0182 in a 2011 Ford Fusion include poor fuel economy, rough idling, and potential stalling issues.

2. What does the OBDII code P0182 for a 2011 Ford Fusion indicate?

OBDII code P0182 for a 2011 Ford Fusion indicates a low input signal from the engine fuel temperature sensor 'A'.

3. What are the possible causes of OBDII code P0182 in a 2011 Ford Fusion?

Possible causes of code P0182 in a 2011 Ford Fusion include a faulty fuel temperature sensor, damaged wiring or connectors, or issues with the engine control module (ECM).

4. How can I diagnose the cause of OBDII code P0182 in my 2011 Ford Fusion?

To diagnose the cause of code P0182 in a 2011 Ford Fusion, you can use a diagnostic scan tool to read the code, inspect the fuel temperature sensor and its wiring, and perform a voltage test on the sensor.

5. Is it safe to continue driving my 2011 Ford Fusion with OBDII code P0182?

It is not recommended to continue driving your 2011 Ford Fusion with code P0182, as it can lead to potential fuel system issues and affect the overall performance of the vehicle.

6. Can I repair OBDII code P0182 in my 2011 Ford Fusion myself?

Repairing code P0182 in a 2011 Ford Fusion may require some technical knowledge. If you are familiar with automotive repairs, you can attempt to replace the fuel temperature sensor or repair any damaged wiring yourself.

7. How much does it typically cost to fix OBDII code P0182 in a 2011 Ford Fusion?

The cost to fix code P0182 in a 2011 Ford Fusion can vary depending on the exact cause of the issue. Generally, replacing the fuel temperature sensor or repairing wiring can cost between $100 to $300 at a repair shop.

8. Can a faulty engine fuel temperature sensor affect the performance of my 2011 Ford Fusion?

Yes, a faulty engine fuel temperature sensor can affect the performance of your 2011 Ford Fusion by causing issues with fuel delivery, combustion, and overall engine efficiency.

9. How long does it take to repair OBDII code P0182 in a 2011 Ford Fusion?

The repair time for code P0182 in a 2011 Ford Fusion can vary based on the exact cause of the issue and the expertise of the technician. Typically, it can take between 1 to 2 hours to diagnose and repair the problem.

10. Will resetting the OBDII code P0182 in my 2011 Ford Fusion make it go away permanently?

Resetting the OBDII code P0182 in your 2011 Ford Fusion may temporarily clear the code, but if the underlying issue is not fixed, the code is likely to reappear. It is important to diagnose and repair the root cause of the problem to prevent the code from coming back.