AutoCodes – Ford – P0180 2011 Ford Fusion

P0180 2011 Ford Fusion Code - Engine Fuel Temperature Sensor 'A' Circuit

Quick Answer

The comprehensive component monitor (CCM) monitors the Engine Fuel Temperature (EFT) Sensor circuit to the Powertrain Control Module (PCM) for low and high voltage. Common causes include Open or short in the harness, Low ambient temperature operation, Incorrect harness connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0180 2011 Ford Fusion indicates Engine Fuel Temperature Sensor 'A' Circuit.
Common causes: Common causes include Open or short in the harness, Low ambient temperature operation, Incorrect harness connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,825

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0180 2011 Ford Fusion Description

The comprehensive component monitor (CCM) monitors the Engine Fuel Temperature (EFT) Sensor circuit to the Powertrain Control Module (PCM) for low and high voltage. If voltage were to fall below or exceed a calibrated limit and amount of time during testing, the test will fail. Open or short in harness. Low ambient temperature operation.

OBDII Code P0180 2011 Ford Fusion - Engine Fuel Temperature Sensor 'A' Circuit - AutoCodes.com — P0180 2011 Ford Fusion Code - Engine Fuel Temperature Sensor 'A' Circuit

What does this mean?

What are the Possible Causes of the DTC P0180 2011 Ford Fusion?

Open or short in the harness
Low ambient temperature operation
Incorrect harness connection
Damaged fuel temperature sensor

How to Fix the DTC P0180 2011 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0180 2011 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0180 2011 Ford Fusion code?

Need more information on how to fix the P0180 2011 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0180 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0180 2011 Ford Fusion Code

1. What are the common symptoms of OBDII code P0180 in a 2011 Ford Fusion?

- Common symptoms include poor fuel economy, rough idling, engine stalling, and issues with starting the vehicle.

2. What does the OBDII code P0180 for the Engine Fuel Temperature Sensor 'A' Circuit indicate in a 2011 Ford Fusion?

- This code indicates a malfunction in the fuel temperature sensor circuit, which can affect fuel delivery and engine performance.

3. What are the possible causes of OBDII code P0180 in a 2011 Ford Fusion?

- Possible causes include a faulty fuel temperature sensor, damaged wiring or connectors in the sensor circuit, or a problem with the Engine Control Module (ECM).

4. How can I diagnose the issue causing OBDII code P0180 in my 2011 Ford Fusion?

- You can use a multimeter to test the fuel temperature sensor for proper resistance values, check the wiring and connectors for damage, and perform a scan tool test to monitor sensor data.

5. Can I continue driving my 2011 Ford Fusion with OBDII code P0180?

- It is not recommended to drive with this code as it can lead to poor engine performance and potential fuel delivery issues. It's best to address the problem promptly.

6. How can I repair OBDII code P0180 in my 2011 Ford Fusion?

- Repair options include replacing the fuel temperature sensor, repairing damaged wiring or connectors, and resetting the fault codes with a scan tool after the repair.

7. Is it possible to reset OBDII code P0180 in a 2011 Ford Fusion without fixing the underlying issue?

- While you can clear the code temporarily, it is likely to return if the root cause of the problem, such as a faulty sensor or wiring issue, is not addressed.

8. How much does it typically cost to repair OBDII code P0180 in a 2011 Ford Fusion?

- The cost can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor, with sensor replacement being a common fix.

9. Can a DIY enthusiast fix OBDII code P0180 in a 2011 Ford Fusion?

- If you have experience working on cars and the necessary tools, you may be able to replace the fuel temperature sensor or check the wiring yourself. Otherwise, it's best to consult a professional.

10. Will OBDII code P0180 cause my 2011 Ford Fusion to fail an emissions test?

- Yes, this code can affect the vehicle's emissions output, potentially causing it to fail an emissions test. It's important to address the issue to pass the test.