AutoCodesFord – P0174 2007 Ford Fusion

P0174 2007 Ford Fusion Code - Fuel Injection System Too Lean Bank 2

Quick Answer

The adaptive fuel strategy continuously monitors the fuel delivery hardware. Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P0174 2007 Ford Fusion indicates Fuel Injection System Too Lean Bank 2.
Common causes
Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 5,573
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Aug 21, 2022
💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0174 2007 Ford Fusion Description

The adaptive fuel strategy continuously monitors the fuel delivery hardware. The test fails when the adaptive fuel tables reach a rich calibrated limit
OBDII Code P0174 2007 Ford Fusion - Fuel Injection System Too Lean Bank 2 - AutoCodes.com
P0174 2007 Ford Fusion Code - Fuel Injection System Too Lean Bank 2

What are the Possible Causes of the DTC P0174 2007 Ford Fusion?

  • Intake air leaks
  • Faulty front heated oxygen sensor
  • Ignition misfiring
  • Faulty fuel injectors
  • Exhaust gas leaks
  • Incorrect fuel pressure
  • Lack of fuel
  • Faulty Mass Air Flow (MAF) sensor
  • Incorrect Positive Crankcase Ventilation (PCV) hose connection

How to Fix the DTC P0174 2007 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0174 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0174 2007 Ford Fusion code?

Need more information on how to fix the P0174 2007 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0174 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0174 2007 Ford Fusion Code

1. What does the OBDII code P0174 mean on a 2007 Ford Fusion?

P0174 indicates that the fuel mixture on Bank 2 (the side of the engine with cylinder 2) is running too lean, meaning there is too much air and not enough fuel.

2. What are the common symptoms of P0174 in a 2007 Ford Fusion?

Symptoms may include rough idling, poor acceleration, reduced fuel efficiency, engine hesitation, or even stalling in severe cases. The check engine light will also illuminate.

3. What causes the P0174 code in a 2007 Ford Fusion?

Common causes include a vacuum leak, a faulty mass airflow (MAF) sensor, a clogged fuel injector, a weak fuel pump, a dirty fuel filter, or an exhaust leak near the oxygen sensor.

4. Can a dirty mass airflow (MAF) sensor trigger the P0174 code?

Yes, a dirty or malfunctioning MAF sensor can provide incorrect air intake readings, leading to a lean condition and triggering the P0174 code.

5. How do I diagnose the P0174 code on my 2007 Ford Fusion?

Start by checking for vacuum leaks, inspecting the MAF sensor, examining the fuel injectors, and testing the oxygen sensors. Use a scan tool to monitor live data for long-term fuel trims on Bank 2.

6. Can a vacuum leak cause the P0174 code?

Yes, a vacuum leak allows unmetered air into the engine, causing a lean condition and potentially triggering the P0174 code.

7. Is it safe to drive with a P0174 code on my 2007 Ford Fusion?

While the car may still run, driving with this code can cause long-term engine damage, reduced performance, and increased emissions. It’s best to address the issue promptly.

8. Can a clogged fuel injector cause the P0174 code?

Yes, if a fuel injector on Bank 2 is clogged or not delivering enough fuel, it can lead to a lean condition and set the P0174 code.

9. How do you fix the P0174 code on a 2007 Ford Fusion?

Repairs may include fixing vacuum leaks, cleaning or replacing the MAF sensor, replacing faulty oxygen sensors, cleaning fuel injectors, or addressing fuel delivery issues like a weak fuel pump.

10. Will replacing the oxygen sensor fix the P0174 code?

Replacing the oxygen sensor may fix the issue if the sensor itself is faulty. However, it’s important to diagnose the root cause, as upstream issues like vacuum leaks or fuel delivery problems could also trigger this code.

Discuss the causes and fixes for P0174 2007 Ford Fusion OBDII Code

Code P0174 2007 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play