P0171 2008 Nissan Altima_sedan Code - Fuel Injection System Too Lean Bank 1
Quick Answer
With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the heated oxygen sensors 1. Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0171 2008 Nissan Altima_sedan indicates Fuel Injection System Too Lean Bank 1.
- Common causes
- Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0171 2008 Nissan Altima_sedan Description
In case the amount of the compensation value is extremely large (The actual mixture ratio is too lean.), the ECM judges the condition as the fuel injection system malfunction and light up the MIL (2 trip detection logic).
What are the Possible Causes of the DTC P0171 2008 Nissan Altima_sedan?
- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection
How to Fix the DTC P0171 2008 Nissan Altima_sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0171 2008 Nissan Altima_sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0171 2008 Nissan Altima_sedan code?
Need more information on how to fix the P0171 2008 Nissan Altima_sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0171 2008 Nissan Altima_sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0171 2008 Nissan Altima_sedan Code
1. What are the common symptoms of OBDII code P0171 in a 2008 Nissan Altima sedan?
- Common symptoms include rough idle, hesitation or stumbling during acceleration, loss of power, and the illumination of the check engine light.
2. What does the OBDII code P0171 "Fuel Injection System Too Lean Bank 1" mean for a 2008 Nissan Altima sedan?
- This code indicates that the engine is running too lean, meaning there is an imbalance in the air-fuel mixture on bank 1 of the engine.
3. What are the possible causes of OBDII code P0171 in a 2008 Nissan Altima sedan?
- Common causes include a vacuum leak, faulty oxygen sensor, dirty or clogged fuel injectors, a malfunctioning mass airflow sensor, or a fuel delivery issue.
4. How can I diagnose the cause of OBDII code P0171 in my 2008 Nissan Altima sedan?
- Diagnosing the issue may involve performing a visual inspection for damaged hoses, checking the oxygen sensor readings, testing the fuel pressure, and inspecting the air intake system.
5. Can driving with OBDII code P0171 in a 2008 Nissan Altima sedan cause further damage?
- Continuing to drive with a lean air-fuel mixture can potentially cause damage to the engine components, decrease fuel efficiency, and lead to more severe issues over time.
6. How can I repair OBDII code P0171 in my 2008 Nissan Altima sedan?
- Repair options may include fixing vacuum leaks, replacing the oxygen sensor, cleaning or replacing fuel injectors, cleaning the mass airflow sensor, or addressing any fuel delivery issues.
7. Is it possible to reset OBDII code P0171 in a 2008 Nissan Altima sedan without fixing the underlying issue?
- While you can clear the code with an OBDII scanner, the check engine light is likely to come back on if the root cause of the lean condition is not addressed.
8. Are there any maintenance tips to prevent OBDII code P0171 in a 2008 Nissan Altima sedan?
- Regularly inspecting and replacing air filters, ensuring proper fuel system maintenance, and addressing any issues promptly can help prevent the occurrence of code P0171.
9. Can a DIY enthusiast without much experience fix OBDII code P0171 in a 2008 Nissan Altima sedan?
- Depending on the underlying cause, some repairs related to code P0171 may be manageable for a DIY enthusiast with basic mechanical skills and access to tools.
10. How long can I safely drive my 2008 Nissan Altima sedan with OBDII code P0171 before getting it repaired?
- It is recommended to address the issue as soon as possible to prevent further damage to the engine and ensure optimal performance and fuel efficiency.
Discuss the causes and fixes for P0171 2008 Nissan Altima_sedan OBDII Code
-
I’m having this problem now. A few months ago I noticed that at low speeds or starting from a traffic light my car would start moving but suddenly lose all power/acceleration. This would only last a few seconds and then (having kept my foot steadily at about the same pressure on the accelerator) and then the acceleration would spring back to life! I guess the ECM was recalculating and adjusted the air/fuel mix. This was extremely noticeable when driving uphill and especially carrying heavier than normal load (extra passengers or whatever). Well the problem persisted and grew more frequent to the point I no longer attempt to make any sudden lane changes or rely on any maneuver involving quick acceleration because that’s just too iffy now. Finally after leaving my lights on during a frigid snowy night - and the battery drained - the DTC codes appeared. First it was a code for the ECM (I think that was related to the battery being off for about a week. Yeah when I discovered the dead battery I just let the car sit for a week and while the snow melted b4 fixing). Anyway I cleared the ECM code and about a week later this P0171 code showed up. I cleared the code and drove a few more days (light trips to grocery store etc ) before the P0171 code reappeared. So now that low power/acceleration issue happens almost constantly from 0mph and at low speeds. And only rarely at speeds over 25-30 mph.
-
Unfortunately, there are many things that can set the P0171 from bad spark plugs to clogged fuel injectors. I recommend starting by replacing the air filter and cleaning the Mass Air Flow (MAF) sensor. From my experience a dirty or faulty MAF is the most common problem that will set the P0171 code.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
