P0171 2005 Nissan Altima_sedan Code - Fuel Injection System Too Lean Bank 1
Quick Answer
With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the heated oxygen sensors 1. Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0171 2005 Nissan Altima_sedan indicates Fuel Injection System Too Lean Bank 1.
- Common causes
- Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0171 2005 Nissan Altima_sedan Description
In case the amount of the compensation value is extremely large (The actual mixture ratio is too lean.), the ECM judges the condition as the fuel injection system malfunction and light up the MIL (2 trip detection logic).
What are the Possible Causes of the DTC P0171 2005 Nissan Altima_sedan?
- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection
How to Fix the DTC P0171 2005 Nissan Altima_sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0171 2005 Nissan Altima_sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0171 2005 Nissan Altima_sedan code?
Need more information on how to fix the P0171 2005 Nissan Altima_sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0171 2005 Nissan Altima_sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0171 2005 Nissan Altima_sedan Code
1. What are the common symptoms of OBDII code P0171 on a 2005 Nissan Altima Sedan?
- Common symptoms include rough idling, poor acceleration, engine hesitation, and an illuminated check engine light.
2. What does the OBDII code P0171 in a 2005 Nissan Altima Sedan indicate?
- The code indicates that the fuel injection system on Bank 1 is running too lean, meaning there is a higher air-to-fuel ratio than optimal.
3. What are the typical causes of OBDII code P0171 on a 2005 Nissan Altima Sedan?
- Common causes include a vacuum leak, faulty oxygen sensor, dirty mass airflow sensor, fuel pump issues, or a clogged fuel filter.
4. How can I diagnose the OBDII code P0171 on my 2005 Nissan Altima Sedan?
- You can start by checking for vacuum leaks, inspecting the oxygen sensor, cleaning the mass airflow sensor, testing the fuel pump, and replacing the fuel filter if necessary.
5. Can a clogged fuel injector cause the OBDII code P0171 on a 2005 Nissan Altima Sedan?
- Yes, a clogged fuel injector can disrupt the balance of air and fuel mixture, leading to a lean condition and triggering the P0171 code.
6. Is it safe to continue driving my 2005 Nissan Altima Sedan with the OBDII code P0171 present?
- It is not recommended to drive with the P0171 code active, as it can lead to poor engine performance and potentially cause damage to other components over time.
7. How much does it typically cost to repair OBDII code P0171 on a 2005 Nissan Altima Sedan?
- The cost of repairs for the P0171 code can vary depending on the underlying cause, but it may range from $100 to $500 or more, including parts and labor.
8. Can a DIY enthusiast fix the OBDII code P0171 issue on a 2005 Nissan Altima Sedan?
- Some simple fixes like checking for vacuum leaks or cleaning sensors can be done by a DIY enthusiast, but more complex issues may require professional diagnosis and repair.
9. Will resetting the check engine light make the OBDII code P0171 disappear on a 2005 Nissan Altima Sedan?
- Resetting the check engine light will clear the code temporarily, but if the underlying issue causing the P0171 code is not addressed, the light will likely come back on.
10. How can regular maintenance help prevent the OBDII code P0171 from appearing on a 2005 Nissan Altima Sedan?
- Regular maintenance, including changing the fuel filter, inspecting vacuum hoses, and keeping sensors clean, can help prevent issues that may trigger the P0171 code.
Discuss the causes and fixes for P0171 2005 Nissan Altima_sedan OBDII Code
-
Can this code come up because of lack of actual oxygen in the air fuel mixture ? say there is some other paint burning under the hood.
-
Actually the code is set when there is too much air or not enough fuel. You could try just clearing the code first.
-
thanks !! yea I tried clearing the code few times and it re-appears. I got some more info after my first comment and I too feel it's not paint burning. I could check the real time STFT and LTFT and they are 20+ and 35+ respectively when in idle rpm (lean). Also at times when the car is started i could get some gas smell in the cabin and later it goes aways (this is very random).
-
Try cleaning the Mass Air Flow (MAF) sensor. Dirty sensor could cause and improper sensor reading, thus lean system.
Also, check fuel leak around the the fuel lines and under the vehicle and for exhaust leaks.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
