P0170 Mitsubishi Code - Fuel Trim Malfunction Bank 1
Quick Answer
With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closer to the theoretical mixture ratio based on the mixture ratio feedback signal from the heated oxygen sensors 1. Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0170 Mitsubishi indicates Fuel Trim Malfunction Bank 1.
- Common causes
- Common causes include Intake air leaks, Faulty front heated oxygen sensor, Ignition misfiring.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0170 Mitsubishi Description
In case the amount of the compensation value is extremely large (The actual mixture ratio is too lean.), the ECM judges the condition as the fuel injection system malfunction and lights up the Malfunction Indicator Light (MIL) (2 trip detection logic). The Diagnostic Trouble Code (DTC) will be set when the Fuel Injection System does not operate properly, or the amount of mixture ratio compensation is not correct.
What are the Possible Causes of the DTC P0170 Mitsubishi?
- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection
How to Fix the DTC P0170 Mitsubishi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0170 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0170 Mitsubishi code?
Need more information on how to fix the P0170 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0170 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0170 Mitsubishi Code
1. What are the common symptoms of OBDII code P0170 (Fuel Trim Malfunction Bank 1) in a Mitsubishi?
- Common symptoms include rough idling, decreased fuel efficiency, loss of power, and potentially black smoke coming from the exhaust.
2. What are the possible causes of OBDII code P0170 in a Mitsubishi?
- The code P0170 can be triggered by issues such as a vacuum leak, faulty oxygen sensor, clogged fuel filter, or a malfunctioning mass airflow sensor (MAF).
3. How can I diagnose the cause of OBDII code P0170 in my Mitsubishi?
- Using a code reader or scan tool to retrieve the specific code and examining related components like the oxygen sensor, MAF sensor, and vacuum lines can help diagnose the issue.
4. Can a dirty or malfunctioning fuel injector cause OBDII code P0170 in a Mitsubishi?
- Yes, a dirty or malfunctioning fuel injector can disrupt the air-fuel mixture and lead to a fuel trim malfunction, triggering the P0170 code.
5. What steps can I take to repair OBDII code P0170 in my Mitsubishi?
- Repair options may include fixing vacuum leaks, replacing the oxygen sensor, cleaning or replacing the MAF sensor, checking the fuel filter, and inspecting the fuel injectors.
6. Is it safe to continue driving my Mitsubishi with OBDII code P0170 present?
- It is not recommended to drive for an extended period with the P0170 code, as it can lead to poor engine performance and potential damage to other components over time.
7. Can a faulty catalytic converter cause OBDII code P0170 in a Mitsubishi?
- A failing catalytic converter may not directly cause the P0170 code, but it can be a result of prolonged fuel trim issues if left unaddressed.
8. How can I reset the OBDII code P0170 in my Mitsubishi after making necessary repairs?
- After addressing the root cause of the issue, you can reset the code using a code reader or scan tool to clear the error from the vehicle's system.
9. Are there any preventive maintenance tips to avoid OBDII code P0170 in a Mitsubishi?
- Regularly inspecting and maintaining components like the oxygen sensor, MAF sensor, fuel system, and vacuum lines can help prevent issues leading to the P0170 code.
10. Will a low-quality or contaminated fuel trigger OBDII code P0170 in a Mitsubishi?
- Yes, using low-quality fuel or fuel contaminated with debris can affect the air-fuel mixture, potentially leading to a fuel trim malfunction and triggering the P0170 code.
Discuss the causes and fixes for P0170 Mitsubishi OBDII Code
-
Have Lancer 2004, 2.0 with LPG installed, deleted all errors and car is running fine on gasoline, so will see what is wrong with LPG
-
Hi i have 07 lancer i changed oxygen sensor both os them and still check engine light comes on i got it checked says fuel trim bank 1 whats the next thing i could do
-
Well I changed air filter, cleaned air intake hoses and everything went back to normal. So probably cheapest fix i could get(spent 8 euro)
-
I have a 2007 triton glxr with this error. any help how to fix problem please.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
