P0159 2008 Nissan Maxima Code - HO2S22 slow response sensor
Quick Answer
The Powertrain Control Module (PCM) supplies a voltage of about 450 mV between the HO2S high and low signal circuits. Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0159 2008 Nissan Maxima indicates HO2S22 slow response sensor .
- Common causes
- Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0159 2008 Nissan Maxima Description
The PCM monitors and stores the heated oxygen sensor (HO2S) voltage information. The PCM evaluates the HO2S voltage samples in order to determine the amount of time the HO2S voltage was out of range. The PCM compares the stored HO2S voltage samples taken within each sample period and determines if majority of the samples are out of the operating range.
What are the Possible Causes of the DTC P0159 2008 Nissan Maxima?
- Faulty Rear Heated Oxygen Sensor Bank 2
- Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0159 2008 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0159 2008 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0159 2008 Nissan Maxima code?
Need more information on how to fix the P0159 2008 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0159 2008 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0159 2008 Nissan Maxima Code
1. What does OBDII code P0159 for a 2008 Nissan Maxima indicate?
- OBDII code P0159 for a 2008 Nissan Maxima indicates a slow response from the HO2S22 sensor, also known as the bank 2 sensor 2 oxygen sensor.
2. What are the common symptoms of a HO2S22 slow response sensor in a 2008 Nissan Maxima?
- Common symptoms of a HO2S22 slow response sensor in a 2008 Nissan Maxima include poor fuel economy, rough idling, and possibly an illuminated check engine light.
3. What are the potential causes of the HO2S22 slow response sensor code in a 2008 Nissan Maxima?
- Potential causes of the HO2S22 slow response sensor code in a 2008 Nissan Maxima include a faulty oxygen sensor, wiring issues, exhaust leaks, or a malfunctioning engine control module (ECM).
4. How can I diagnose the HO2S22 slow response sensor issue in my 2008 Nissan Maxima?
- To diagnose the HO2S22 slow response sensor issue in your 2008 Nissan Maxima, you can use an OBDII scanner to retrieve the specific trouble code and then inspect the oxygen sensor, wiring, and exhaust system for any visible damage.
5. Can I continue to drive my 2008 Nissan Maxima with a HO2S22 slow response sensor problem?
- It is generally not recommended to drive your 2008 Nissan Maxima with a HO2S22 slow response sensor problem as it can lead to decreased fuel efficiency and potential damage to the catalytic converter over time.
6. What is the typical repair process for fixing a HO2S22 slow response sensor in a 2008 Nissan Maxima?
- The typical repair process for fixing a HO2S22 slow response sensor in a 2008 Nissan Maxima involves replacing the faulty oxygen sensor, repairing any damaged wiring, fixing exhaust leaks, and resetting the check engine light.
7. How much does it cost to repair a HO2S22 slow response sensor in a 2008 Nissan Maxima?
- The cost to repair a HO2S22 slow response sensor in a 2008 Nissan Maxima can vary depending on the specific issue, but it typically ranges from $150 to $400 for parts and labor.
8. Can I reset the check engine light after fixing the HO2S22 slow response sensor in my 2008 Nissan Maxima?
- Yes, you can reset the check engine light after fixing the HO2S22 slow response sensor in your 2008 Nissan Maxima using an OBDII scanner or by disconnecting the car battery for a few minutes.
9. How often should the oxygen sensors be replaced in a 2008 Nissan Maxima to prevent HO2S22 slow response sensor issues?
- Oxygen sensors in a 2008 Nissan Maxima typically last around 60,000 to 90,000 miles, so it is recommended to replace them within this mileage range to prevent HO2S22 slow response sensor issues.
10. Are there any aftermarket oxygen sensors available for a 2008 Nissan Maxima to address the HO2S22 slow response sensor problem?
- Yes, there are aftermarket oxygen sensors available for a 2008 Nissan Maxima that can be used to address the HO2S22 slow response sensor problem. Make sure to choose a quality replacement sensor compatible with your vehicle.
Discuss the causes and fixes for P0159 2008 Nissan Maxima OBDII Code
Code P0159 2008 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
