AutoCodes – Toyota – P0156 2011 Toyota Camry

P0156 2011 Toyota Camry Code - Oxygen Sensor Bank 2 Sensor 2 Circuit Malfunction

Quick Answer

In order to obtain a high purification rate of the carbon monoxide (CO), hydrocarbon (HC) and nitrogen oxide (NOx) components in the exhaust gas, a TWC is used. Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0156 2011 Toyota Camry indicates Oxygen Sensor Bank 2 Sensor 2 Circuit Malfunction.
Common causes: Common causes include Faulty Rear Heated Oxygen Sensor Bank 2, Rear Heated Oxygen Sensor Bank 2 harness is open or shorted, Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 10,302

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0156 2011 Toyota Camry Description

In order to obtain a high purification rate of the carbon monoxide (CO), hydrocarbon (HC) and nitrogen oxide (NOx) components in the exhaust gas, a TWC is used. For the most efficient use of the TWC, the air-fuel ratio must be precisely controlled so that it is always close to the stoichiometric air-fuel level. For the purpose of helping the ECM to deliver accurate air-fuel ratio control, a Heated Oxygen (HO2) sensor is used.
The HO2 sensor is located behind the TWC, and detects the oxygen concentration in the exhaust gas. Since the sensor is integrated with the heater that heats the sensing portion, it is possible to detect the oxygen concentration even when the intake air volume is low (the exhaust gas temperature is low). When the air-fuel ratio becomes lean, the oxygen concentration in the exhaust gas is rich. The HO2 sensor informs the ECM that the post-TWC air-fuel ratio is lean (low voltage, i.e. less than 0.45 V). Conversely, when the air-fuel ratio is richer than the stoichiometric air-fuel level, the oxygen concentration in the exhaust gas becomes lean. The HO2 sensor informs the ECM that the post-TWC air-fuel ratio is rich (high voltage, i.e. more than 0.45 V). The HO2 sensor has the property of changing its output voltage drastically when the air-fuel ratio is close to the stoichiometric level.
The ECM uses the supplementary information from the HO2 sensor to determine whether the air-fuel ratio after the TWC is rich or lean, and adjusts the fuel injection time accordingly. Thus, if the HO2 sensor is working improperly due to internal malfunctions, the ECM is unable to compensate for deviations in the primary air-fuel ratio control.

OBDII Code P0156 2011 Toyota Camry - Oxygen Sensor Bank 2 Sensor 2 Circuit Malfunction - AutoCodes.com — P0156 2011 Toyota Camry Code - Oxygen Sensor Bank 2 Sensor 2 Circuit Malfunction

What does this mean?

What are the Possible Causes of the DTC P0156 2011 Toyota Camry?

Faulty Rear Heated Oxygen Sensor Bank 2
Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
EFI Relay
Inappropriate fuel pressure
Faulty fuel injectors
Intake air leaks may be faulty
Exhaust gas leaks

How to Fix the DTC P0156 2011 Toyota Camry?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Replacing the Rear Heated Oxygen Sensor Bank 2 usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0156 2011 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0156 2011 Toyota Camry code?

Need more information on how to fix the P0156 2011 Toyota Camry code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0156 2011 Toyota Camry code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0156 2011 Toyota Camry Code

1. What does the OBDII code P0156 on a 2011 Toyota Camry indicate?

The code P0156 indicates a malfunction in the oxygen sensor (Bank 2 Sensor 2) circuit of the vehicle.

2. What are common symptoms of a P0156 code in a 2011 Toyota Camry?

Common symptoms of a P0156 code include poor fuel economy, rough idling, and potential issues with acceleration.

3. What are the possible causes of a P0156 code in a 2011 Toyota Camry?

Possible causes of a P0156 code include a faulty oxygen sensor, wiring issues in the oxygen sensor circuit, or problems with the vehicle's engine control module (ECM).

4. How can I diagnose a P0156 code in my 2011 Toyota Camry?

Diagnosing a P0156 code typically involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor and its wiring, and testing the sensor's functionality.

5. Can I continue driving my 2011 Toyota Camry with a P0156 code?

While it may be possible to drive the vehicle with a P0156 code, it is not recommended as it can lead to decreased fuel efficiency and potential long-term damage to the engine.

6. How can I repair a P0156 code in my 2011 Toyota Camry?

Repairing a P0156 code often involves replacing the oxygen sensor (Bank 2 Sensor 2), fixing any wiring issues, or resetting the ECM after addressing the underlying problem.

7. Is it possible to clear a P0156 code in a 2011 Toyota Camry without fixing the issue?

Clearing a P0156 code without fixing the underlying problem is not recommended, as the issue will likely persist and may lead to further complications down the line.

8. How much does it cost to fix a P0156 code in a 2011 Toyota Camry?

The cost of fixing a P0156 code can vary depending on the exact cause of the issue, but it may involve expenses related to parts, labor, and diagnostic fees.

9. Can a DIY enthusiast repair a P0156 code in a 2011 Toyota Camry?

While some experienced DIY enthusiasts may be able to address a P0156 code themselves, it is generally recommended to seek professional help to ensure a proper diagnosis and repair.

10. How often does a P0156 code occur in a 2011 Toyota Camry?

The occurrence of a P0156 code in a 2011 Toyota Camry can vary depending on factors such as vehicle maintenance, driving conditions, and overall vehicle health.