AutoCodes – Ford – P0155 2012 Ford Fusion

P0155 2012 Ford Fusion Code - O2 Heater Circuit Bank 2 Sensor 1

Quick Answer

During testing the heated oxygen sensor (HO2S) heaters are checked for open and short circuits and excessive current draw. Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit fuse, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 harness is open shorted to ground. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0155 2012 Ford Fusion indicates O2 Heater Circuit Bank 2 Sensor 1.
Common causes
Common causes include Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit fuse, Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 harness is open shorted to ground.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 5,437
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0155 2012 Ford Fusion Description

During testing the heated oxygen sensor (HO2S) heaters are checked for open and short circuits and excessive current draw. The test fails when the current draw exceeds a calibrated limit or an open or short circuit is detected.
OBDII Code P0155 2012 Ford Fusion - O2 Heater Circuit Bank 2 Sensor 1 - AutoCodes.com
P0155 2012 Ford Fusion Code - O2 Heater Circuit Bank 2 Sensor 1

What are the Possible Causes of the DTC P0155 2012 Ford Fusion?

  • Faulty Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1
  • Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit fuse
  • Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 harness is open shorted to ground
  • Heated Oxygen Sensor (H2OS) Bank 2 Sensor 1 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How to Fix the DTC P0155 2012 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0155 2012 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0155 2012 Ford Fusion code?

Need more information on how to fix the P0155 2012 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0155 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0155 2012 Ford Fusion Code

1. What does OBDII code P0155 for a 2012 Ford Fusion mean?

Code P0155 indicates an issue with the O2 sensor heater circuit for Bank 2 Sensor 1 in the exhaust system.

2. What are the common symptoms of OBDII code P0155 on a 2012 Ford Fusion?

Common symptoms include poor fuel economy, rough idling, engine misfires, and the illumination of the Check Engine Light.

3. What are the possible causes of OBDII code P0155 on a 2012 Ford Fusion?

Possible causes include a faulty O2 sensor, damaged wiring or connectors in the O2 sensor circuit, a blown fuse, or a problem with the ECM.

4. How do I diagnose the O2 heater circuit issue for Bank 2 Sensor 1 on a 2012 Ford Fusion?

To diagnose the problem, you can use a multimeter to test the O2 sensor heater circuit resistance, check for proper voltage supply, and inspect the wiring and connectors for any damage.

5. Can I continue driving my 2012 Ford Fusion with OBDII code P0155?

It is not recommended to drive with a P0155 code as it can lead to poor engine performance and potential damage to the catalytic converter over time.

6. How can I repair OBDII code P0155 on my 2012 Ford Fusion?

Repair options include replacing the Bank 2 Sensor 1 O2 sensor, repairing any damaged wiring or connectors, checking and replacing fuses if needed, and resetting the fault code with a diagnostic tool.

7. Is it possible to clear the OBDII code P0155 on a 2012 Ford Fusion without fixing the underlying issue?

Clearing the code without fixing the problem will only temporarily turn off the Check Engine Light. The issue will persist and may lead to more significant problems if not addressed.

8. How much does it typically cost to fix OBDII code P0155 on a 2012 Ford Fusion?

The cost of fixing a P0155 code can vary depending on the root cause of the issue, but it may range from $100 to $300 for parts and labor.

9. Are there any preventive maintenance steps to avoid O2 heater circuit issues on a 2012 Ford Fusion?

Regularly servicing your vehicle, using high-quality fuel, and avoiding rough driving can help prevent issues with the O2 sensor heater circuit.

10. Can a DIY enthusiast with basic automotive knowledge fix OBDII code P0155 on a 2012 Ford Fusion?

While some may be able to address simple issues like replacing the O2 sensor, diagnosing and repairing complex electrical problems may require professional help or specialized tools.

Discuss the causes and fixes for P0155 2012 Ford Fusion OBDII Code

Code P0155 2012 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play