AutoCodes – Ford – P0153 1999 Ford F150

P0153 1999 Ford F150 Code - O2 Sensor Circuit Slow Response Bank 2 Sensor 1

Quick Answer

The front heated oxygen sensor (or O2 sensor 1) is placed into the exhaust manifold. Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Front Heated Oxygen Sensor Bank 2 harness is open or shorted, Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0153 1999 Ford F150 indicates O2 Sensor Circuit Slow Response Bank 2 Sensor 1.
Common causes: Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Front Heated Oxygen Sensor Bank 2 harness is open or shorted, Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 8,046

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0153 1999 Ford F150 Description

The front heated oxygen sensor (or O2 sensor 1) is placed into the exhaust manifold. It detects the amount of oxygen in the exhaust gas compared to the outside air. The heated oxygen sensor 1 has a closed-end tube made of ceramic zirconia. The zirconia generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The heated oxygen sensor 1 signal is sent to the Engine Control Module (ECM). The ECM adjusts the injection pulse duration to achieve the ideal air-fuel ratio. The ideal air-fuel ratio occurs near the radical change from 1V to 0V.

OBDII Code P0153 1999 Ford F150 - O2 Sensor Circuit Slow Response Bank 2 Sensor 1 - AutoCodes.com — P0153 1999 Ford F150 Code - O2 Sensor Circuit Slow Response Bank 2 Sensor 1

What does this mean?

What are the Possible Causes of the DTC P0153 1999 Ford F150?

Faulty Front Heated Oxygen Sensor Bank 2
Front Heated Oxygen Sensor Bank 2 harness is open or shorted
Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection
Inappropriate fuel pressure
Faulty fuel injectors
Intake air leaks
Exhaust gas leaks

How to Fix the DTC P0153 1999 Ford F150?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Replacing the Front Heated Oxygen Sensor Bank 2 usually takes care of the problem.
The HEGO Monitor checks the HO2S Sensor frequency and amplitude. If during testing the frequency and amplitude were to fall below a calibrated limit, the test will fail.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0153 1999 Ford F150 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0153 1999 Ford F150 code?

Need more information on how to fix the P0153 1999 Ford F150 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0153 1999 Ford F150 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0153 1999 Ford F150 Code

1. What does the OBDII code P0153 for a 1999 Ford F150 mean?

- It indicates an issue with the O2 sensor circuit slow response on Bank 2 Sensor 1.

2. What are the common symptoms of O2 sensor circuit slow response on Bank 2 Sensor 1?

- Symptoms may include poor fuel economy, engine hesitation, rough idling, and an illuminated check engine light.

3. What are the possible causes of the P0153 code in a 1999 Ford F150?

- Common causes include a faulty O2 sensor, wiring issues, exhaust leaks, or a malfunctioning engine control module (ECM).

4. How can I diagnose the O2 sensor circuit slow response issue on Bank 2 Sensor 1?

- Use an OBDII scanner to check for the specific trouble code, visually inspect the sensor and surrounding wiring, and perform a voltage test on the sensor.

5. Can I still drive my 1999 Ford F150 with the P0153 code active?

- It is not recommended to continue driving with this issue as it can lead to decreased fuel efficiency and potential damage to the catalytic converter.

6. How can I repair the O2 sensor circuit slow response problem on Bank 2 Sensor 1?

- Start by replacing the O2 sensor on Bank 2 Sensor 1, ensuring proper installation and secure wiring connections.

7. Is it possible to reset the P0153 code in a 1999 Ford F150 without fixing the underlying issue?

- While you can clear the code with an OBDII scanner, it will likely reappear if the root cause is not addressed.

8. How much does it typically cost to repair the O2 sensor circuit slow response issue on a 1999 Ford F150?

- The cost can vary depending on the cause of the problem, but replacing the O2 sensor can range from $100 to $300 including parts and labor.

9. Are there any preventive measures to avoid the P0153 code from occurring again?

- Regularly inspect and maintain your vehicle's exhaust system, promptly address any warning signs, and follow the recommended maintenance schedule.

10. Can a DIY enthusiast with basic automotive knowledge fix the O2 sensor circuit slow response problem?

- Yes, replacing the O2 sensor on Bank 2 Sensor 1 can be a DIY project for those comfortable working on cars, but be sure to follow proper procedures and safety precautions.