P0152 2010 Ford Fusion Code - O2 Sensor Circuit High Voltage Bank 2 Sensor 1
Quick Answer
The heated oxygen sensor (HO2S) signals are monitored for an over voltage condition. Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Intake air leaks may be faulty, Exhaust gas leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0152 2010 Ford Fusion indicates O2 Sensor Circuit High Voltage Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Intake air leaks may be faulty, Exhaust gas leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0152 2010 Ford Fusion Description
What are the Possible Causes of the DTC P0152 2010 Ford Fusion?
- Faulty Front Heated Oxygen Sensor Bank 2
- Intake air leaks may be faulty
- Exhaust gas leaks
- Front Heated Oxygen Sensor Bank 2 harness is open or shorted
- Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
How to Fix the DTC P0152 2010 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0152 2010 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0152 2010 Ford Fusion code?
Need more information on how to fix the P0152 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0152 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0152 2010 Ford Fusion Code
1. What does the OBDII code P0152 mean on a 2010 Ford Fusion?
P0152 indicates that the oxygen sensor in Bank 2 Sensor 1 is reporting a high voltage signal, suggesting a rich air-fuel mixture.
2. What are the symptoms of a P0152 code in a 2010 Ford Fusion?
Common symptoms include poor fuel economy, rough idling, a noticeable fuel smell from the exhaust, and the Check Engine Light turning on.
3. What causes the P0152 code on a 2010 Ford Fusion?
Potential causes include a faulty O2 sensor, shorted wiring in the sensor circuit, a rich-running engine due to fuel system issues, or a malfunctioning PCM.
4. Which oxygen sensor is Bank 2 Sensor 1 on a 2010 Ford Fusion?
Bank 2 Sensor 1 refers to the upstream oxygen sensor on the side of the engine opposite cylinder 1.
5. Can I drive my 2010 Ford Fusion with a P0152 code?
Driving with a P0152 code for a short period may not cause immediate harm, but prolonged driving can lead to engine damage or catalytic converter failure.
6. How do you diagnose a P0152 code in a 2010 Ford Fusion?
Diagnosis involves checking the O2 sensor voltage readings, inspecting the sensor's wiring for shorts, and testing for fuel system issues like a stuck fuel injector.
7. How do you fix the P0152 code on a 2010 Ford Fusion?
Repairs may involve replacing the faulty oxygen sensor, repairing damaged wiring, cleaning or replacing a stuck fuel injector, or updating/reprogramming the PCM.
8. How much does it cost to repair a P0152 code on a 2010 Ford Fusion?
Repair costs can range from $150 to $300 for an O2 sensor replacement, depending on labor and parts. Other repairs, like fuel system fixes, may vary in cost.
9. Can a dirty or clogged air filter cause a P0152 code in a 2010 Ford Fusion?
A dirty air filter is unlikely to directly cause P0152, but it can contribute to a rich air-fuel mixture, which might indirectly trigger the code.
10. Will clearing the P0152 code on a 2010 Ford Fusion fix the problem?
Clearing the code will turn off the Check Engine Light temporarily, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P0152 2010 Ford Fusion OBDII Code
Code P0152 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
