P0152 2009 Ford Fusion Code - O2 Sensor Circuit High Voltage Bank 2 Sensor 1
Quick Answer
The heated oxygen sensor (HO2S) signals are monitored for an over voltage condition. Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Intake air leaks may be faulty, Exhaust gas leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0152 2009 Ford Fusion indicates O2 Sensor Circuit High Voltage Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Intake air leaks may be faulty, Exhaust gas leaks.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0152 2009 Ford Fusion Description
What are the Possible Causes of the DTC P0152 2009 Ford Fusion?
- Faulty Front Heated Oxygen Sensor Bank 2
- Intake air leaks may be faulty
- Exhaust gas leaks
- Front Heated Oxygen Sensor Bank 2 harness is open or shorted
- Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
How to Fix the DTC P0152 2009 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0152 2009 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0152 2009 Ford Fusion code?
Need more information on how to fix the P0152 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0152 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0152 2009 Ford Fusion Code
1. What are the common symptoms of OBDII code P0152 on a 2009 Ford Fusion?
- Common symptoms include poor fuel economy, rough idling, engine misfires, and the illumination of the check engine light.
2. What does the OBDII code P0152 for a 2009 Ford Fusion indicate?
- This code indicates that the O2 sensor circuit on Bank 2 Sensor 1 is registering a high voltage condition.
3. What are the possible causes of OBDII code P0152 on a 2009 Ford Fusion?
- Possible causes include a faulty O2 sensor, damaged wiring or connectors in the O2 sensor circuit, exhaust leaks, or issues with the engine's air-fuel mixture.
4. How can I diagnose the O2 sensor circuit high voltage issue on Bank 2 Sensor 1 in my 2009 Ford Fusion?
- You can diagnose this issue by using an OBDII scanner to read the code, checking the wiring and connectors for damage, and testing the O2 sensor itself for proper function.
5. Can I still drive my 2009 Ford Fusion with the OBDII code P0152 present?
- It is generally not recommended to drive your vehicle with this code present, as it can lead to poor engine performance and potential damage if left unresolved.
6. How can I repair OBDII code P0152 on my 2009 Ford Fusion?
- Repair options may include replacing the O2 sensor on Bank 2 Sensor 1, repairing any damaged wiring or connectors, fixing exhaust leaks, or addressing any issues with the air-fuel mixture.
7. Is it possible to reset the OBDII code P0152 on a 2009 Ford Fusion without fixing the underlying issue?
- While you can clear the code using an OBDII scanner, it is not recommended as the issue will likely reappear if the root cause is not addressed.
8. How much does it cost to repair OBDII code P0152 on a 2009 Ford Fusion?
- The cost of repair can vary depending on the exact cause of the issue, but it may involve parts and labor costs for replacing the O2 sensor or repairing the related components.
9. Can a DIY enthusiast fix OBDII code P0152 on a 2009 Ford Fusion?
- Depending on your skill level and access to tools, some DIY enthusiasts may be able to address this issue by replacing the O2 sensor or checking and repairing the wiring themselves.
10. Are there any preventive measures to avoid OBDII code P0152 on a 2009 Ford Fusion?
- Regular maintenance, such as checking and replacing the O2 sensors at recommended intervals, ensuring proper engine performance, and addressing any engine issues promptly, can help prevent this code from occurring.
Discuss the causes and fixes for P0152 2009 Ford Fusion OBDII Code
Code P0152 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
