AutoCodes – Ford – P0152 2007 Ford Fusion

P0152 2007 Ford Fusion Code - O2 Sensor Circuit High Voltage Bank 2 Sensor 1

Quick Answer

The heated oxygen sensor (HO2S) signals are monitored for an over voltage condition. Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Intake air leaks may be faulty, Exhaust gas leaks. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0152 2007 Ford Fusion indicates O2 Sensor Circuit High Voltage Bank 2 Sensor 1.
Common causes
Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Intake air leaks may be faulty, Exhaust gas leaks.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 3,285
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0152 2007 Ford Fusion Description

The heated oxygen sensor (HO2S) signals are monitored for an over voltage condition. The code is set when the HO2S signal voltage is 1.5 volts or greater.
OBDII Code P0152 2007 Ford Fusion - O2 Sensor Circuit High Voltage Bank 2 Sensor 1 - AutoCodes.com
P0152 2007 Ford Fusion Code - O2 Sensor Circuit High Voltage Bank 2 Sensor 1

What are the Possible Causes of the DTC P0152 2007 Ford Fusion?

  • Faulty Front Heated Oxygen Sensor Bank 2
  • Intake air leaks may be faulty
  • Exhaust gas leaks
  • Front Heated Oxygen Sensor Bank 2 harness is open or shorted
  • Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection
  • Inappropriate fuel pressure
  • Faulty fuel injectors

How to Fix the DTC P0152 2007 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0152 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0152 2007 Ford Fusion code?

Need more information on how to fix the P0152 2007 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0152 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0152 2007 Ford Fusion Code

What does the OBDII code P0152 mean on a 2007 Ford Fusion?

Code P0152 indicates that the oxygen sensor on bank 2 sensor 1 is detecting a higher voltage than expected, suggesting a rich air-fuel mixture condition.

What are common symptoms of code P0152 in a 2007 Ford Fusion?

Symptoms may include a check engine light, rough engine idle, decreased fuel efficiency, and a strong smell of fuel from the exhaust.

Where is Bank 2 Sensor 1 located on a 2007 Ford Fusion?

Bank 2 Sensor 1 refers to the oxygen sensor located on the bank of the engine that does not contain cylinder #1, and it is positioned before the catalytic converter.

What could cause code P0152 to appear on a 2007 Ford Fusion?

Possible causes include a faulty oxygen sensor, leaks in the exhaust system, fuel pressure issues, or a malfunctioning fuel injector on bank 2.

How can I fix the OBDII code P0152 on my 2007 Ford Fusion?

Repairing this code may involve replacing the faulty oxygen sensor, repairing any exhaust leaks, checking and adjusting fuel pressure, or replacing a bad fuel injector.

Is it safe to drive my 2007 Ford Fusion with code P0152?

While you can drive your vehicle, it is advisable to address the issue promptly as ignoring it can lead to more serious problems such as damage to the catalytic converter or poor engine performance.

How do I verify that the new O2 sensor has resolved code P0152 in my 2007 Ford Fusion?

After replacing the oxygen sensor, clear the engine codes with an OBDII scanner and drive the vehicle. If the code does not return, the issue is likely resolved.

What tools are needed to diagnose code P0152 on a 2007 Ford Fusion?

Diagnosing this code typically requires an OBDII scanner, a digital voltmeter, and potentially a fuel pressure gauge to check related systems accurately.

Can a dirty air filter cause code P0152 on a 2007 Ford Fusion?

While a dirty air filter itself is unlikely to trigger this code directly, it can contribute to overall engine performance issues that might exacerbate the underlying problem causing the high voltage reading.

Discuss the causes and fixes for P0152 2007 Ford Fusion OBDII Code

Code P0152 2007 Ford Fusion comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play