AutoCodes – Jeep – P0151 Jeep

P0151 Jeep Code - O2 sensor 2/1 Circuit Low

Quick Answer

The front heated oxygen sensor (or O2 sensor 1) is placed into the exhaust manifold. Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Front Heated Oxygen Sensor Bank 2 harness is open or shorted, Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0151 Jeep indicates O2 sensor 2/1 Circuit Low.
Common causes
Common causes include Faulty Front Heated Oxygen Sensor Bank 2, Front Heated Oxygen Sensor Bank 2 harness is open or shorted, Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 18,871
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Jun 14, 2020
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0151 Jeep Description

The front heated oxygen sensor (or O2 sensor 1) is placed into the exhaust manifold. It detects the amount of oxygen in the exhaust gas compared to the outside air. The heated oxygen sensor 1 has a closed-end tube made of ceramic zirconia. The zirconia generates voltage from approximately 1V in richer conditions to 0V in leaner conditions. The heated oxygen sensor 1 signal is sent to the Engine Control Module (ECM). The ECM adjusts the injection pulse duration to achieve the ideal air-fuel ratio. The ideal air-fuel ratio occurs near the radical change from 1V to 0V.
OBDII Code P0151 Jeep - O2 sensor 2/1 Circuit Low - AutoCodes.com
P0151 Jeep Code - O2 sensor 2/1 Circuit Low

What are the Possible Causes of the DTC P0151 Jeep?

  • Faulty Front Heated Oxygen Sensor Bank 2
  • Front Heated Oxygen Sensor Bank 2 harness is open or shorted
  • Front Heated Oxygen Sensor Bank 2 circuit poor electrical connection
  • Inappropriate fuel pressure
  • Faulty fuel injectors
  • Intake air leaks may be faulty
  • Exhaust gas leaks

How to Fix the DTC P0151 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0151 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0151 Jeep code?

Need more information on how to fix the P0151 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0151 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0151 Jeep Code

1. What are the common symptoms of OBDII code P0151 in a Jeep related to the O2 sensor 2/1 Circuit Low?

- Common symptoms include decreased fuel efficiency, rough idling, engine misfires, and the illumination of the Check Engine Light.

2. What can cause the O2 sensor 2/1 Circuit Low code (P0151) in a Jeep?

- Possible causes include a faulty oxygen sensor, damaged wiring or connectors, exhaust leaks, or issues with the vehicle's engine control module.

3. How serious is the P0151 OBDII code in a Jeep?

- While the vehicle may still be drivable with this code, it can lead to decreased fuel efficiency and potentially cause damage to the catalytic converter if left unresolved.

4. How can I diagnose the O2 sensor 2/1 Circuit Low code (P0151) in my Jeep?

- Diagnosis typically involves using an OBDII scanner to read the code, inspecting the oxygen sensor and related wiring for damage, and checking for exhaust leaks.

5. Can I repair the P0151 code on my Jeep myself?

- Depending on your level of automotive expertise, you may be able to replace the faulty oxygen sensor or repair damaged wiring yourself. Otherwise, it is recommended to seek professional assistance.

6. Will driving with the P0151 code harm my Jeep?

- Continuing to drive with the P0151 code may result in decreased fuel efficiency and potential damage to the catalytic converter over time if the issue is not addressed promptly.

7. How much does it cost to fix the O2 sensor 2/1 Circuit Low code in a Jeep?

- The cost of repairs can vary depending on the specific cause of the code, but it may range from $100 to $300 for parts and labor.

8. Can resetting the Check Engine Light resolve the P0151 code in a Jeep?

- Simply resetting the Check Engine Light will not fix the underlying issue causing the P0151 code. It is essential to diagnose and repair the root cause of the problem.

9. How long does it take to repair the OBDII code P0151 related to the O2 sensor 2/1 Circuit Low in a Jeep?

- The repair time can vary based on the cause of the code and the extent of the repair needed. It may take anywhere from 30 minutes to a few hours to complete the repair.

10. Will replacing the O2 sensor fix the P0151 code in my Jeep?

- In many cases, replacing the faulty oxygen sensor can resolve the P0151 code. However, it is essential to ensure that there are no other underlying issues causing the fault before the replacement.

Discuss the causes and fixes for P0151 Jeep OBDII Code

Code P0151 Jeep comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play