AutoCodes – Dodge – P0148 Dodge

P0148 Dodge Code - High Pressure Common Rail Checksum

Quick Answer

The Fuel Control Actuator (FCA) is an electronically controlled solenoid valve. Common causes include Fuel Leaks, Faulty Fuel Control Actuator, Faulty Fuel Pressure Sensor. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P0148 Dodge indicates High Pressure Common Rail Checksum.
Common causes
Common causes include Fuel Leaks, Faulty Fuel Control Actuator, Faulty Fuel Pressure Sensor.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 30,980
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 13, 2019
πŸ’¬ Need more help? Ask Coddy for instant answers β€” it's free!

Code P0148 Dodge Description

The Fuel Control Actuator (FCA) is an electronically controlled solenoid valve. The ECM controls the amount of fuel that enters the high-pressure pumping chambers by opening and closing the FCA based on a demanded fuel pressure. When the FCA is opened, the maximum amount of fuel is being supplied to the fuel injection pump. Any fuel that does not enter the injection pump is directed to the cascade overflow valve. The cascade overflow valve regulates how much excess fuel is used for lubrication of the pump and how much is returned to the fuel tank through the drain manifold.
OBDII Code P0148 Dodge - High Pressure Common Rail Checksum - AutoCodes.com
P0148 Dodge Code - High Pressure Common Rail Checksum

What are the Possible Causes of the DTC P0148 Dodge?

  • Fuel Leaks
  • Faulty Fuel Control Actuator
  • Faulty Fuel Pressure Sensor

How to Fix the DTC P0148 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0148 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0148 Dodge code?

Need more information on how to fix the P0148 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0148 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0148 Dodge Code

1. What does the OBDII code P0148 mean on a Dodge vehicle?

P0148 indicates a "High Pressure Common Rail Checksum" error, meaning the engine control module (ECM) detected an issue with the high-pressure fuel system's performance or data integrity.

2. What are the common symptoms of code P0148 on a Dodge?

Symptoms may include poor engine performance, reduced fuel efficiency, difficulty starting, engine misfires, or the engine stalling unexpectedly.

3. What causes the P0148 code on a Dodge?

Common causes include a faulty fuel pump, clogged fuel filter, malfunctioning fuel pressure sensor, damaged fuel injectors, or wiring and electrical issues in the fuel system.

4. Can a clogged fuel filter trigger the P0148 code?

Yes, a clogged fuel filter can restrict fuel flow, causing irregular fuel pressure and triggering the P0148 code.

5. How serious is the P0148 code on a Dodge?

The P0148 code is serious as it affects the fuel system's performance. Driving with this code may lead to engine damage or unsafe driving conditions.

6. How is the P0148 code diagnosed?

A mechanic will use a scan tool to confirm the code, inspect the fuel system components like the fuel pump, filters, and injectors, and check for wiring or electrical faults.

7. Can I drive my Dodge with the P0148 code active?

Driving with the P0148 code is not recommended, as it can cause engine damage, poor performance, or leave you stranded due to stalling.

8. What repairs can fix the P0148 code on a Dodge?

Repairs may include replacing a faulty fuel pump, cleaning or replacing the fuel filter, repairing or replacing damaged wiring, or replacing the fuel pressure sensor or injectors.

9. How much does it cost to fix a P0148 code on a Dodge?

Repair costs vary depending on the issue. Replacing a fuel filter may cost around $100, while a fuel pump replacement could range from $500 to $1,500, including labor.

10. Can low-quality fuel cause the P0148 code?

Yes, low-quality or contaminated fuel can affect the fuel system's performance and potentially trigger the P0148 code.

Discuss the causes and fixes for P0148 Dodge OBDII Code

  • fuel rail has been replaced with new sencor

  • Broken #4 injector line, replaced line and tube that goes into the block, still have engine light on??

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play