AutoCodes – Suzuki – P0140 Suzuki

P0140 Suzuki Code - HO2S Circuit Insufficient Activity Bank 1 Sensor 2

Quick Answer

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Common causes include Faulty Heated Oxygen Sensors (HO2S) Bank 1 Sensor 2, Heated Oxygen Sensors Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Sensors Bank 1 Sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0140 Suzuki indicates HO2S Circuit Insufficient Activity Bank 1 Sensor 2.
Common causes: Common causes include Faulty Heated Oxygen Sensors (HO2S) Bank 1 Sensor 2, Heated Oxygen Sensors Bank 1 Sensor 2 harness is open or shorted, Heated Oxygen Sensors Bank 1 Sensor 2 circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,475

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 24, 2020

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0140 Suzuki Description

The Heated Oxygen Sensors (HO2S) are used for fuel control and catalyst monitoring. Each HO2S compares the oxygen content of the surrounding air with the oxygen content of the exhaust stream. When the engine is started, the control module operates in an Open Loop mode, ignoring the HO2S signal voltage while calculating the air-to-fuel ratio. The control module supplies the HO2S with a reference or bias voltage of about 450 mV. While the engine runs, the HO2S heats up and begins to generate a voltage within a range of 0-1,000 mV. This voltage will fluctuate above and below the bias voltage. Once sufficient HO2S voltage fluctuation is observed by the control module, Closed Loop is entered. The control module uses the HO2S voltage to determine the air-to-fuel ratio. An HO2S voltage that increases above bias voltage toward 1,000 mV indicates a rich fuel mixture. An HO2S voltage that decreases below bias voltage toward 0 mV indicates a lean fuel mixture.
The heating elements inside each HO2S heat the sensor to bring the sensor up to operating conditions faster. This allows the system to enter Closed Loop earlier and the control module to calculate the air-to-fuel ratio sooner.
The Diagnostic Trouble Code (DTC) will set if the Engine Control Module (ECM) detects that a secondary HO2S signal voltage is more or less than 60 mV for greater than 4 seconds of for a cumulative of 50 seconds.

OBDII Code P0140 Suzuki - HO2S Circuit Insufficient Activity Bank 1 Sensor 2 - AutoCodes.com — P0140 Suzuki Code - HO2S Circuit Insufficient Activity Bank 1 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0140 Suzuki?

Faulty Heated Oxygen Sensors (HO2S) Bank 1 Sensor 2
Heated Oxygen Sensors Bank 1 Sensor 2 harness is open or shorted
Heated Oxygen Sensors Bank 1 Sensor 2 circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0140 Suzuki?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0140 Suzuki code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0140 Suzuki code?

Need more information on how to fix the P0140 Suzuki code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0140 Suzuki code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0140 Suzuki Code

1. What are the common symptoms of OBDII code P0140 in a Suzuki vehicle?

- Common symptoms include poor fuel economy, rough idling, stalling, and an illuminated check engine light.

2. What does the OBDII code P0140 on a Suzuki indicate?

- The code P0140 refers to an issue with the HO2S (Heated Oxygen Sensor) circuit for Bank 1 Sensor 2, indicating insufficient activity.

3. What are the possible causes of the P0140 code in a Suzuki?

- Potential causes include a faulty oxygen sensor, damaged wiring or connectors, exhaust leaks, or an issue with the engine control module (ECM).

4. How can I diagnose the cause of the P0140 code in my Suzuki?

- You can use a scan tool to monitor the oxygen sensor readings, visually inspect the sensor and its wiring, check for exhaust leaks, and perform voltage tests on the sensor.

5. What are the repair options for fixing the P0140 code in a Suzuki?

- Possible repairs include replacing the oxygen sensor, repairing damaged wiring or connectors, fixing exhaust leaks, or reprogramming the ECM if necessary.

6. Can I continue driving my Suzuki with the P0140 code present?

- While you may be able to drive with the code present, it is recommended to address the issue promptly to prevent potential damage to the vehicle and ensure optimal performance.

7. How much does it typically cost to repair the P0140 code in a Suzuki?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

8. Are there any maintenance tips to prevent the P0140 code from occurring in the future?

- Regularly inspecting and maintaining the oxygen sensors, addressing any exhaust leaks promptly, and following the manufacturer's recommended service schedule can help prevent the code from reoccurring.

9. Can a DIY enthusiast fix the P0140 code in a Suzuki, or is professional assistance recommended?

- Depending on your skill level and access to tools, you may be able to address some causes of the P0140 code yourself. However, complex issues or sensor replacement may require professional assistance.

10. How long does it typically take to repair the P0140 code in a Suzuki at a repair shop?

- The repair time can vary based on the specific cause of the code, but most repairs related to the P0140 code can be completed within a few hours to a day at a repair shop.