AutoCodes – Nissan – P0137 2010 Nissan Altima Sedan

P0137 2010 Nissan Altima Sedan Code - Heated Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2

Quick Answer

The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. Common causes include Faulty Rear Heated Oxygen Sensor Bank 1, Rear Heated Oxygen Sensor Bank 1 harness is open or shorted, Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: P0137 2010 Nissan Altima Sedan indicates Heated Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2.
Common causes: Common causes include Faulty Rear Heated Oxygen Sensor Bank 1, Rear Heated Oxygen Sensor Bank 1 harness is open or shorted, Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,756

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jun 14, 2020

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0137 2010 Nissan Altima Sedan Description

The heated oxygen sensor 2 (HO2S), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. For optimum catalyst operation, the air fuel mixture (air-fuel ratio) must be maintained near the ideal stoichiometric ratio. The HO2S output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Engine Control Module (ECM) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The ECM interprets Lean when the HO2S voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The ECM interprets Rich when the HO2S voltage is above 0.45 V.

OBDII Code P0137 2010 Nissan Altima Sedan - Heated Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2 - AutoCodes.com — P0137 2010 Nissan Altima Sedan Code - Heated Oxygen Sensor Circuit Low Voltage Bank 1 Sensor 2

What does this mean?

What are the Possible Causes of the DTC P0137 2010 Nissan Altima Sedan?

Faulty Rear Heated Oxygen Sensor Bank 1
Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
Inappropriate fuel pressure
Faulty fuel injectors
Intake air leaks may be faulty
Exhaust gas leaks

How to Fix the DTC P0137 2010 Nissan Altima Sedan?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Replacing the Rear Heated Oxygen Sensor Bank 1 usually takes care of the problem.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0137 2010 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0137 2010 Nissan Altima Sedan code?

Need more information on how to fix the P0137 2010 Nissan Altima Sedan code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0137 2010 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0137 2010 Nissan Altima Sedan Code

1. What does OBDII code P0137 in a 2010 Nissan Altima Sedan mean?

Code P0137 indicates a low voltage condition in the heated oxygen sensor circuit for Bank 1 Sensor 2 in a 2010 Nissan Altima Sedan.

2. What are the common symptoms of a P0137 code in a 2010 Nissan Altima Sedan?

Common symptoms of a P0137 code may include poor fuel economy, rough idling, engine hesitation, and the illumination of the Check Engine Light.

3. What are the possible causes of a P0137 code in a 2010 Nissan Altima Sedan?

Possible causes of a P0137 code include a faulty oxygen sensor, damaged wiring or connectors in the sensor circuit, exhaust leaks, or issues with the engine's air-fuel mixture.

4. How do I diagnose a P0137 code in a 2010 Nissan Altima Sedan?

Diagnosing a P0137 code involves using an OBDII scanner to retrieve the code, inspecting the oxygen sensor and its wiring for damage, checking for exhaust leaks, and testing the sensor's voltage output.

5. Can I continue driving my 2010 Nissan Altima Sedan with a P0137 code?

It is not advisable to ignore a P0137 code, as it can lead to decreased fuel efficiency and potential damage to the catalytic converter. It's recommended to address the issue promptly.

6. How can I repair a P0137 code in my 2010 Nissan Altima Sedan?

Repairing a P0137 code may involve replacing the Bank 1 Sensor 2 oxygen sensor, repairing damaged wiring or connectors, fixing any exhaust leaks, and clearing the code with an OBDII scanner.

7. How much does it cost to fix a P0137 code in a 2010 Nissan Altima Sedan?

The cost of fixing a P0137 code can vary depending on the underlying issue. Replacing an oxygen sensor can cost between $200 to $400, while fixing wiring or exhaust leaks may incur additional labor charges.

8. Can a DIY enthusiast repair a P0137 code in a 2010 Nissan Altima Sedan?

While some DIY enthusiasts may be able to replace the oxygen sensor themselves, diagnosing and repairing the root cause of the P0137 code may require advanced automotive knowledge and tools.

9. How often does a P0137 code occur in a 2010 Nissan Altima Sedan?

The occurrence of a P0137 code can vary depending on the vehicle's maintenance history and driving conditions. Regularly servicing the oxygen sensors can help prevent this code from appearing.

10. Is it necessary to reset the Check Engine Light after fixing a P0137 code in a 2010 Nissan Altima Sedan?

Yes, it's important to use an OBDII scanner to clear the code and reset the Check Engine Light after addressing the underlying issue causing the P0137 code in a 2010 Nissan Altima Sedan.