P0133 2013 Nissan Rogue Code - Air Fuel Ratio Circuit Slow Response Bank 1 Sensor 1
Quick Answer
The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. Common causes include Faulty Air fuel ratio (A/F) sensor 1 bank 1, Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted, Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0133 2013 Nissan Rogue indicates Air Fuel Ratio Circuit Slow Response Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Air fuel ratio (A/F) sensor 1 bank 1, Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted, Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0133 2013 Nissan Rogue Description
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance. An electronic circuit controls the pump current through the oxygen pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800°C (1,292 - 1,472°F).
What are the Possible Causes of the DTC P0133 2013 Nissan Rogue?
- Faulty Air fuel ratio (A/F) sensor 1 bank 1
- Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted
- Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0133 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0133 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0133 2013 Nissan Rogue code?
Need more information on how to fix the P0133 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0133 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0133 2013 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0133 in a 2013 Nissan Rogue?
- Common symptoms include poor fuel economy, rough idling, engine misfires, and an illuminated check engine light.
2. What does the OBDII code P0133 on a 2013 Nissan Rogue indicate?
- The code P0133 indicates a slow response from the air-fuel ratio sensor located in Bank 1 Sensor 1 of the vehicle.
3. What are some possible causes of the P0133 code in a 2013 Nissan Rogue?
- Possible causes include a faulty air-fuel ratio sensor, wiring issues, a vacuum leak, exhaust system leaks, or a malfunctioning engine control module.
4. How can I diagnose the P0133 code on my 2013 Nissan Rogue?
- Diagnosing the P0133 code involves checking the air-fuel ratio sensor's wiring, connections, and sensor performance using an OBDII scanner or multimeter.
5. Can I drive my 2013 Nissan Rogue with the P0133 code present?
- It is not recommended to drive your vehicle with the P0133 code as it can cause decreased fuel efficiency and potential engine damage if left unaddressed.
6. How can I repair the P0133 code on my 2013 Nissan Rogue?
- Repairing the P0133 code may involve replacing the air-fuel ratio sensor, repairing wiring issues, fixing any vacuum or exhaust leaks, or reprogramming the engine control module.
7. Are there any DIY tips for fixing the P0133 code in a 2013 Nissan Rogue?
- While some aspects of diagnosing and repairing the P0133 code can be done DIY, it is recommended to seek professional help for accurate diagnosis and proper repair.
8. How much does it typically cost to repair the P0133 code on a 2013 Nissan Rogue?
- The cost of repairing the P0133 code can vary depending on the exact cause of the issue, but it may range from $100 to $500, including parts and labor.
9. Will resetting the check engine light resolve the P0133 code temporarily?
- Resetting the check engine light may temporarily clear the code, but unless the underlying issue causing the P0133 code is addressed, the light is likely to come back on.
10. How often should the air-fuel ratio sensor be replaced in a 2013 Nissan Rogue to prevent the P0133 code?
- The air-fuel ratio sensor should typically be replaced every 100,000 miles or as recommended by the manufacturer to prevent issues like the P0133 code from occurring.
Discuss the causes and fixes for P0133 2013 Nissan Rogue OBDII Code
Code P0133 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
