P0133 2007 Ford Fusion Code - O2 Sensor Circuit Slow Response Bank 1 Sensor 1
Quick Answer
The powertrain control module(PCM) commands an air/fuel ratio that changes in the shape of a square wave. Common causes include Faulty Front Heated Oxygen Sensor Bank 1, Front Heated Oxygen Sensor Bank 1 harness is open or shorted, Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0133 2007 Ford Fusion indicates O2 Sensor Circuit Slow Response Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Front Heated Oxygen Sensor Bank 1, Front Heated Oxygen Sensor Bank 1 harness is open or shorted, Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0133 2007 Ford Fusion Description
What are the Possible Causes of the DTC P0133 2007 Ford Fusion?
- Faulty Front Heated Oxygen Sensor Bank 1
- Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0133 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0133 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0133 2007 Ford Fusion code?
Need more information on how to fix the P0133 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0133 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0133 2007 Ford Fusion Code
1. What does the OBDII code P0133 mean on a 2007 Ford Fusion?
P0133 indicates that the oxygen sensor in bank 1 sensor 1 is responding more slowly than usual to changes in air/fuel mixture, which may affect the efficiency of the engine's performance.
2. Where is the Bank 1 Sensor 1 oxygen sensor located in a 2007 Ford Fusion?
Bank 1 Sensor 1 refers to the oxygen sensor located on the side of the engine that houses cylinder number 1, typically positioned before the catalytic converter.
3. What are common symptoms of code P0133 in a 2007 Ford Fusion?
Symptoms include rough idling, decreased fuel efficiency, engine misfires, and the check engine light being illuminated.
4. What can cause the P0133 code in a 2007 Ford Fusion?
Causes may include a faulty oxygen sensor, dirty or contaminated sensor, exhaust leaks near the sensor, or problems with the wiring or connectors leading to the sensor.
5. How can I fix the code P0133 on my 2007 Ford Fusion?
Repairs can involve replacing the oxygen sensor, repairing any exhaust leaks near the sensor, cleaning or replacing the sensor if it is contaminated, and checking the wiring and connectors for damage or corrosion.
6. Is it safe to drive my 2007 Ford Fusion with the P0133 code?
While you can still drive your vehicle, it's advisable to address the issue soon to avoid potential long-term damage to the engine or catalytic converter.
7. How do I verify that a new O2 sensor has resolved the P0133 code on my 2007 Ford Fusion?
After replacing the sensor, clear the code with an OBDII scanner and drive the vehicle for a while. If the code does not return and the vehicle runs smoothly, the issue is likely resolved.
8. Can a P0133 code affect the fuel economy of my 2007 Ford Fusion?
Yes, a slow response from the oxygen sensor can lead to less optimal fuel mixture adjustments by the engine's computer, which can decrease fuel efficiency.
9. What tools are needed to diagnose the P0133 code in a 2007 Ford Fusion?
You will need an OBDII scanner to read the code and possibly a multimeter to check the oxygen sensor's functionality and wiring integrity.
10. How urgent is it to address the P0133 code in a 2007 Ford Fusion?
It is moderately urgent. Delaying repairs can lead to more significant engine problems, increased emissions, and reduced fuel efficiency, potentially resulting in more costly repairs.
Discuss the causes and fixes for P0133 2007 Ford Fusion OBDII Code
Code P0133 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
