P0132 2013 Nissan Rogue Code - Air Fuel Ratio Circuit High Bank 1 Sensor 1
Quick Answer
The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. Common causes include Faulty Air fuel ratio (A/F) sensor 1 bank 1, Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted, Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0132 2013 Nissan Rogue indicates Air Fuel Ratio Circuit High Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Air fuel ratio (A/F) sensor 1 bank 1, Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted, Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0132 2013 Nissan Rogue Description
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance. An electronic circuit controls the pump current through the oxygen pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800°C (1,292 - 1,472°F).
What are the Possible Causes of the DTC P0132 2013 Nissan Rogue?
- Faulty Air fuel ratio (A/F) sensor 1 bank 1
- Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted
- Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0132 2013 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0132 2013 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0132 2013 Nissan Rogue code?
Need more information on how to fix the P0132 2013 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0132 2013 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0132 2013 Nissan Rogue Code
1. What does OBDII code P0132 on a 2013 Nissan Rogue indicate?
- P0132 indicates an issue with the Air Fuel Ratio Circuit High for Bank 1 Sensor 1, which is the oxygen sensor located before the catalytic converter.
2. What are the common symptoms of OBDII code P0132 in a 2013 Nissan Rogue?
- Common symptoms include poor fuel efficiency, rough idling, engine misfires, and the illumination of the Check Engine light.
3. What are the possible causes of OBDII code P0132 in a 2013 Nissan Rogue?
- Causes may include a faulty oxygen sensor, wiring or connector issues, a vacuum leak, exhaust system leaks, or an engine running too rich.
4. How can I diagnose the OBDII code P0132 in my 2013 Nissan Rogue?
- Diagnose by inspecting the oxygen sensor wiring and connector, checking for exhaust leaks, testing the sensor's voltage, and using a scan tool to monitor sensor data.
5. Can I drive my 2013 Nissan Rogue with OBDII code P0132?
- It's best not to drive extensively with P0132 as it can lead to decreased fuel efficiency and potentially cause damage to the catalytic converter over time.
6. How do I repair OBDII code P0132 in my 2013 Nissan Rogue?
- Repair options include replacing the Bank 1 Sensor 1 oxygen sensor, repairing wiring or connectors, fixing any vacuum or exhaust leaks, and ensuring the engine runs at the correct air-fuel ratio.
7. Is it possible to reset OBDII code P0132 in a 2013 Nissan Rogue?
- While you can clear the code with an OBDII scanner, the underlying issue causing P0132 should be diagnosed and repaired to prevent the code from reappearing.
8. How much does it typically cost to fix OBDII code P0132 in a 2013 Nissan Rogue?
- The cost can vary depending on the exact cause, but generally, replacing the oxygen sensor can range from $100 to $300, while additional repairs may increase the total cost.
9. Can a DIY enthusiast repair OBDII code P0132 in a 2013 Nissan Rogue?
- Depending on your automotive repair skills, replacing the oxygen sensor or fixing simple wiring issues may be feasible for a DIY enthusiast with the necessary tools and knowledge.
10. How often should the oxygen sensor be replaced in a 2013 Nissan Rogue to prevent OBDII code P0132?
- Oxygen sensors typically last around 60,000 to 90,000 miles, but regular maintenance checks can help identify issues before they trigger codes like P0132.
Discuss the causes and fixes for P0132 2013 Nissan Rogue OBDII Code
Code P0132 2013 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
