P0132 2006 Infiniti G35 Code - Air Fuel Ratio Circuit High Bank 1 Sensor 1
Quick Answer
The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. Common causes include Faulty Air fuel ratio (A/F) sensor 1 bank 1, Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted, Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0132 2006 Infiniti G35 indicates Air Fuel Ratio Circuit High Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Air fuel ratio (A/F) sensor 1 bank 1, Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted, Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0132 2006 Infiniti G35 Description
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance. An electronic circuit controls the pump current through the oxygen pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800°C (1,292 - 1,472°F).
What are the Possible Causes of the DTC P0132 2006 Infiniti G35?
- Faulty Air fuel ratio (A/F) sensor 1 bank 1
- Air fuel ratio (A/F) sensor 1 bank 1 harness is open or shorted
- Air fuel ratio (A/F) sensor 1 bank 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0132 2006 Infiniti G35?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0132 2006 Infiniti G35 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0132 2006 Infiniti G35 code?
Need more information on how to fix the P0132 2006 Infiniti G35 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0132 2006 Infiniti G35 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0132 2006 Infiniti G35 Code
1. What are common symptoms of OBDII code P0132 in a 2006 Infiniti G35?
- Common symptoms include poor fuel economy, rough idling, loss of power, and the illumination of the check engine light.
2. What does the OBDII code P0132 indicate in a 2006 Infiniti G35?
- The code P0132 indicates a "Air Fuel Ratio Circuit High Bank 1 Sensor 1" error, related to the oxygen sensor's voltage being higher than normal.
3. What are possible causes of OBDII code P0132 in a 2006 Infiniti G35?
- Possible causes include a faulty oxygen sensor, wiring issues, exhaust leaks, engine misfires, or a rich air-fuel mixture.
4. How can I diagnose the OBDII code P0132 in my 2006 Infiniti G35?
- Diagnosis involves using an OBDII scanner to read the code, inspecting the oxygen sensor and its wiring, checking for exhaust leaks, and testing the air-fuel ratio.
5. Can I drive my 2006 Infiniti G35 with the OBDII code P0132?
- It is not recommended to drive the vehicle with the code P0132 as it can lead to poor performance and potential damage to the engine components.
6. How can I repair the OBDII code P0132 in my 2006 Infiniti G35?
- Repair options include replacing the faulty oxygen sensor, repairing any wiring issues, fixing exhaust leaks, addressing engine misfires, or adjusting the air-fuel mixture.
7. Will resetting the OBDII code P0132 in my 2006 Infiniti G35 make it go away permanently?
- Resetting the code may temporarily turn off the check engine light, but if the underlying issue is not fixed, the code is likely to reappear.
8. How much does it typically cost to repair the OBDII code P0132 in a 2006 Infiniti G35?
- The cost of repair can vary depending on the exact cause, but it may range from $100 to $300 for parts and labor.
9. Can a DIY enthusiast fix the OBDII code P0132 in a 2006 Infiniti G35?
- Depending on the skill level, a DIY enthusiast can attempt to fix the issue by replacing the oxygen sensor or checking for wiring problems, but more complex repairs may require professional help.
10. How often should the oxygen sensor be replaced in a 2006 Infiniti G35 to prevent the OBDII code P0132 from recurring?
- Oxygen sensors typically last around 60,000 to 90,000 miles, so it's recommended to replace them within this mileage range to prevent issues like the OBDII code P0132 from recurring.
Discuss the causes and fixes for P0132 2006 Infiniti G35 OBDII Code
Code P0132 2006 Infiniti G35 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
