P0130 Mitsubishi Code - HO2S11 Circuit Fault
Quick Answer
The front heated oxygen sensor (or O2 sensor 1) is placed into the exhaust manifold. Common causes include Faulty Front Heated Oxygen Sensor Bank 1, Front Heated Oxygen Sensor Bank 1 harness is open or shorted, Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P0130 Mitsubishi indicates HO2S11 Circuit Fault.
- Common causes
- Common causes include Faulty Front Heated Oxygen Sensor Bank 1, Front Heated Oxygen Sensor Bank 1 harness is open or shorted, Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code P0130 Mitsubishi Description
What are the Possible Causes of the DTC P0130 Mitsubishi?
- Faulty Front Heated Oxygen Sensor Bank 1
- Front Heated Oxygen Sensor Bank 1 harness is open or shorted
- Front Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0130 Mitsubishi?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0130 Mitsubishi code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0130 Mitsubishi code?
Need more information on how to fix the P0130 Mitsubishi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0130 Mitsubishi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0130 Mitsubishi Code
1. What does OBDII code P0130 mean for a Mitsubishi?
Code P0130 indicates a circuit fault in the upstream oxygen sensor (HO2S11), which monitors the air-fuel mixture for engine performance and emissions control.
2. What are the common symptoms of code P0130 in a Mitsubishi?
Symptoms may include poor fuel efficiency, rough idling, hesitation during acceleration, and the check engine light turning on.
3. What causes code P0130 in a Mitsubishi vehicle?
The most common causes are a faulty oxygen sensor, damaged wiring or connectors, exhaust leaks, or issues with the engine control module (ECM).
4. How can I diagnose code P0130 on my Mitsubishi?
Use an OBDII scanner to confirm the code, inspect the wiring and connectors near the oxygen sensor, and check for exhaust leaks or sensor contamination.
5. Can I drive with code P0130 on my Mitsubishi?
While you can drive for a short period, prolonged driving with this code may lead to reduced fuel efficiency, increased emissions, and potential damage to the catalytic converter.
6. How do I fix code P0130 in a Mitsubishi?
Repairs may include replacing the faulty oxygen sensor, repairing damaged wiring, fixing exhaust leaks, or updating/reprogramming the ECM.
7. How much does it cost to repair code P0130 on a Mitsubishi?
The cost varies, but replacing the oxygen sensor typically ranges from $150 to $400, depending on labor rates and parts pricing.
8. What tools do I need to fix code P0130?
You’ll need an OBDII scanner, a wrench set, and possibly a specialized oxygen sensor socket if replacement is required.
9. How do I prevent code P0130 from recurring on my Mitsubishi?
Regularly inspect and maintain your vehicle’s exhaust system, replace oxygen sensors at recommended intervals, and ensure wiring is kept in good condition.
10. Can a dirty air filter cause code P0130 on a Mitsubishi?
While unlikely, a dirty air filter can indirectly affect the air-fuel mixture, which could contribute to sensor issues over time.
Discuss the causes and fixes for P0130 Mitsubishi OBDII Code
Code P0130 Mitsubishi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
