P0130 2012 Nissan Rogue Code - Air Fuel Ratio Circuit Bank 1 Sensor 1
Quick Answer
The Air Fuel Ratio (A/F) sensor is a planar dual-cell limit current sensor. Common causes include Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1, Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted, Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0130 2012 Nissan Rogue indicates Air Fuel Ratio Circuit Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1, Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted, Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0130 2012 Nissan Rogue Description
The sensor is capable of precise measurement λ= 1, but also in the lean and rich range. Together with its control electronics, the sensor outputs a clear, continuous signal throughout a wide range (0.7 < λ < air).
The exhaust gas components diffuse through the diffusion gap at the electrode of the oxygen pump and Nernst concentration cell, where they are brought to thermodynamic balance. An electronic circuit controls the pump current through the oxygen pump cell so that the composition of the exhaust gas in the diffusion gap remains constant at λ = 1. Therefore, the A/F sensor is able to indicate air/fuel ratio by this pumping of current. In addition, a heater is integrated in the sensor to ensure the required operating temperature of 700 - 800°C (1,292 - 1,472°F).
What are the Possible Causes of the DTC P0130 2012 Nissan Rogue?
- Faulty Air fuel ratio (A/F) sensor bank 1 sensor 1
- Air fuel ratio (A/F) sensor bank 1 sensor 1 harness is open or shorted
- Air fuel ratio (A/F) sensor bank 1 sensor 1 circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
How to Fix the DTC P0130 2012 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0130 2012 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0130 2012 Nissan Rogue code?
Need more information on how to fix the P0130 2012 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0130 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0130 2012 Nissan Rogue Code
1. What does OBDII code P0130 for a 2012 Nissan Rogue indicate?
- This code refers to a malfunction in the Air Fuel Ratio Circuit for Bank 1 Sensor 1, which is typically the upstream oxygen sensor.
2. What are common symptoms of OBDII code P0130 in a 2012 Nissan Rogue?
- Common symptoms include poor fuel economy, rough idling, engine misfires, and a noticeable decrease in overall vehicle performance.
3. What are the possible causes of OBDII code P0130 in a 2012 Nissan Rogue?
- The main causes can be a faulty oxygen sensor, damaged wiring or connectors, exhaust leaks, or issues with the engine's air-fuel mixture.
4. How can I diagnose OBDII code P0130 on my 2012 Nissan Rogue?
- Diagnosing this code usually involves using an OBDII scanner to read the fault codes, checking the oxygen sensor's wiring and connections, and inspecting the exhaust system for leaks.
5. Can I continue driving my 2012 Nissan Rogue with OBDII code P0130?
- While the vehicle may still be operational with this code, it is recommended to address the issue promptly to prevent potential damage to the engine and ensure optimal fuel efficiency.
6. How can I repair OBDII code P0130 on a 2012 Nissan Rogue?
- Repair options may include replacing the Bank 1 Sensor 1 oxygen sensor, repairing damaged wiring or connectors, fixing exhaust leaks, or addressing any underlying issues affecting the air-fuel ratio.
7. Is it easy to replace the Bank 1 Sensor 1 oxygen sensor in a 2012 Nissan Rogue?
- The difficulty of replacing the oxygen sensor can vary depending on the vehicle's specific design, but it is generally a straightforward task that can be done with basic tools.
8. Are there any maintenance tips to prevent OBDII code P0130 from recurring in my 2012 Nissan Rogue?
- Regularly checking and maintaining the vehicle's oxygen sensors, monitoring the engine's performance, and promptly addressing any warning signs can help prevent the recurrence of this code.
9. Can a DIY enthusiast fix OBDII code P0130 in a 2012 Nissan Rogue?
- Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to address this code by following online guides or manuals. However, professional assistance is recommended for complex issues.
10. How much does it typically cost to repair OBDII code P0130 on a 2012 Nissan Rogue?
- The repair costs for this code can vary based on the root cause of the issue, but expenses may include the cost of a new oxygen sensor, labor charges, and any additional parts or repairs needed.
Discuss the causes and fixes for P0130 2012 Nissan Rogue OBDII Code
Code P0130 2012 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
