P0128 2008 Honda Accord Code - Coolant System Malfunction
Quick Answer
Indicates that the thermostat monitor has not achieved the required engine operating temperature within a specified amount of time after starting the engine. Common causes include Leaking or stuck open thermostat, Low engine coolant level, Insufficient warm up time. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0128 2008 Honda Accord indicates Coolant System Malfunction.
- Common causes
- Common causes include Leaking or stuck open thermostat, Low engine coolant level, Insufficient warm up time.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0128 2008 Honda Accord Description
What are the Possible Causes of the DTC P0128 2008 Honda Accord?
- Leaking or stuck open thermostat
- Low engine coolant level
- Insufficient warm up time
- Faulty engine coolant temperature sensor
- Engine coolant temperature sensor harness is open or shorted
- Engine coolant temperature sensor circuit poor electrical connection
How to Fix the DTC P0128 2008 Honda Accord?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0128 2008 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0128 2008 Honda Accord code?
Need more information on how to fix the P0128 2008 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0128 2008 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0128 2008 Honda Accord Code
1. What are the common symptoms of OBDII code P0128 in a 2008 Honda Accord?
- Common symptoms include the engine running hotter or colder than normal, a decrease in fuel efficiency, and the temperature gauge showing abnormally low readings.
2. What are the possible causes of the OBDII code P0128 in a 2008 Honda Accord?
- Possible causes include a faulty thermostat, low coolant levels, a malfunctioning coolant temperature sensor, or issues with the cooling system.
3. How can I diagnose the cause of the OBDII code P0128 in my 2008 Honda Accord?
- Start by checking the coolant level and condition, inspecting the thermostat for proper operation, testing the coolant temperature sensor, and ensuring there are no leaks in the cooling system.
4. Can I continue driving my 2008 Honda Accord with the OBDII code P0128?
- It is not recommended to continue driving with the P0128 code as it can lead to overheating, engine damage, and potential breakdowns. It's best to address the issue promptly.
5. How do I repair the OBDII code P0128 in my 2008 Honda Accord?
- Repair may involve replacing a faulty thermostat, topping up coolant levels, replacing the coolant temperature sensor, or addressing any cooling system leaks.
6. Will resetting the OBDII code P0128 in my 2008 Honda Accord make the issue go away?
- Resetting the code may temporarily clear the error, but it will not fix the underlying problem causing the P0128 code. It's important to diagnose and address the root cause.
7. Can a DIY enthusiast fix the OBDII code P0128 in a 2008 Honda Accord?
- Depending on the issue, some DIY enthusiasts may be able to address the P0128 code by following repair guides and having the necessary tools. However, complex issues may require professional help.
8. How much does it typically cost to repair the OBDII code P0128 in a 2008 Honda Accord?
- The cost of repair can vary depending on the specific cause of the P0128 code. It may range from a simple thermostat replacement to more extensive cooling system repairs. Estimates from mechanics can provide more accurate cost details.
9. Are there any preventive maintenance tips to avoid the OBDII code P0128 in a 2008 Honda Accord?
- Regularly checking coolant levels, monitoring the engine temperature gauge, and addressing any cooling system issues promptly can help prevent the occurrence of the P0128 code in your Honda Accord.
10. How long does it typically take to repair the OBDII code P0128 in a 2008 Honda Accord?
- The repair time can vary based on the specific cause of the P0128 code and the complexity of the repair needed. Simple fixes like replacing a thermostat may take a few hours, while more extensive repairs could take longer.
Discuss the causes and fixes for P0128 2008 Honda Accord OBDII Code
Code P0128 2008 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
