P0123 2008 Nissan Maxima Code - Throttle Position Sensor/Switch '1' Circuit High Input
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 2008 Nissan Maxima indicates Throttle Position Sensor/Switch '1' Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0123 2008 Nissan Maxima Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0123 2008 Nissan Maxima?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
How to Fix the DTC P0123 2008 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0123 2008 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0123 2008 Nissan Maxima code?
Need more information on how to fix the P0123 2008 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 2008 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 2008 Nissan Maxima Code
1. What are the common symptoms of OBDII code P0123 in a 2008 Nissan Maxima?
- Common symptoms include poor acceleration, rough idling, stalling, and potential issues with the vehicle's transmission shifting.
2. What does the OBDII code P0123 indicate in a 2008 Nissan Maxima?
- The code P0123 indicates a high input signal from the throttle position sensor or switch '1' circuit in the vehicle's engine control module.
3. What are the possible causes of OBDII code P0123 in a 2008 Nissan Maxima?
- Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the circuit, a malfunctioning engine control module, or a stuck throttle.
4. How can I diagnose the issue related to OBDII code P0123 in my 2008 Nissan Maxima?
- You can use a scan tool to read the code and perform a visual inspection of the throttle position sensor, wiring, and connectors. Testing the sensor's voltage output can also help diagnose the problem.
5. Can I drive my 2008 Nissan Maxima with OBDII code P0123?
- It is not recommended to drive the vehicle with code P0123, as it can lead to further damage and potential safety hazards. It is best to address the issue promptly.
6. How can I repair OBDII code P0123 in my 2008 Nissan Maxima?
- Repair options include replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, resetting the engine control module, or cleaning a stuck throttle.
7. Will resetting the OBDII code P0123 in a 2008 Nissan Maxima fix the issue?
- Resetting the code may temporarily clear the warning light, but it will not fix the underlying problem causing the high input signal from the throttle position sensor.
8. How much does it cost to repair OBDII code P0123 in a 2008 Nissan Maxima?
- The cost of repair can vary depending on the specific issue causing the code. Replacing a throttle position sensor can cost between $100 to $200, while repairing wiring or connectors may involve additional labor costs.
9. Is it possible to prevent OBDII code P0123 in a 2008 Nissan Maxima?
- Regular maintenance and inspections of the throttle position sensor, wiring, and connectors can help prevent issues that may trigger code P0123. Driving responsibly and avoiding sudden throttle changes may also help prevent sensor damage.
10. Can a DIY enthusiast fix OBDII code P0123 in a 2008 Nissan Maxima?
- Depending on the DIY enthusiast's skill level and access to tools, some may be able to replace the throttle position sensor or repair wiring themselves. However, complex issues may require professional diagnosis and repair.
Discuss the causes and fixes for P0123 2008 Nissan Maxima OBDII Code
Code P0123 2008 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
