P0123 2005 Jeep Liberty Code - Throttle Position Sensor/Accelerator Position Pedal Circuit High Input
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0123 2005 Jeep Liberty indicates Throttle Position Sensor/Accelerator Position Pedal Circuit High Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0123 2005 Jeep Liberty Description
Idle position of the throttle valve is determined by the PCM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0123 2005 Jeep Liberty?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0123 2005 Jeep Liberty?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0123 2005 Jeep Liberty code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0123 2005 Jeep Liberty code?
Need more information on how to fix the P0123 2005 Jeep Liberty code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0123 2005 Jeep Liberty code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0123 2005 Jeep Liberty Code
1. What are the common symptoms of OBDII code P0123 in a 2005 Jeep Liberty?
- Common symptoms include a check engine light, lack of power, rough idle, stalling, or poor acceleration.
2. What does the OBDII code P0123 for a 2005 Jeep Liberty indicate?
- The code signifies an issue with the Throttle Position Sensor/Accelerator Pedal Position Circuit experiencing high input.
3. What are some possible causes of OBDII code P0123 in a 2005 Jeep Liberty?
- Potential causes include a faulty throttle position sensor, damaged wiring, a corroded connector, or issues with the accelerator pedal position sensor.
4. How can I diagnose the OBDII code P0123 in my 2005 Jeep Liberty?
- Diagnosis involves using a scan tool to read the code, checking the sensor's wiring and connector for damage, and testing the sensor's voltage output.
5. Can I drive my 2005 Jeep Liberty with OBDII code P0123?
- It's not advisable to drive with this code active, as it can lead to poor engine performance, stalling, or other safety risks.
6. How can I repair OBDII code P0123 in a 2005 Jeep Liberty?
- Repair options may include replacing the throttle position sensor, fixing any damaged wiring or connectors, or addressing issues with the accelerator pedal sensor.
7. Are there any DIY tips for fixing OBDII code P0123 in a 2005 Jeep Liberty?
- DIY enthusiasts can attempt to replace the throttle position sensor themselves after confirming the exact location and proper procedure.
8. How much does it cost to fix OBDII code P0123 in a 2005 Jeep Liberty?
- Repair costs can vary depending on the specific issue, but replacing a throttle position sensor typically ranges from $100 to $200 including parts and labor.
9. Can resetting the OBDII code P0123 in a 2005 Jeep Liberty make it go away temporarily?
- Resetting the code may temporarily turn off the check engine light, but the underlying issue causing the code will persist until properly addressed.
10. Is it necessary to visit a mechanic for OBDII code P0123 in a 2005 Jeep Liberty?
- While some DIY repairs are possible, seeking professional help is recommended to accurately diagnose and fix the issue, ensuring proper functioning of the throttle system.
Discuss the causes and fixes for P0123 2005 Jeep Liberty OBDII Code
Code P0123 2005 Jeep Liberty comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
