AutoCodes – GMC – P0122 2014 GMC Sierra

P0122 2014 GMC Sierra Code - Throttle Position Sensor 1 Circuit Low Voltage

Quick Answer

The Throttle Body Assembly contains a contact-less inductive throttle position sensing element that is managed by a customized integrated circuit. Common causes include Faulty Throttle Body Assembly, Throttle Body Assembly harness is open or shorted, Throttle Body Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0122 2014 GMC Sierra indicates Throttle Position Sensor 1 Circuit Low Voltage.
Common causes: Common causes include Faulty Throttle Body Assembly, Throttle Body Assembly harness is open or shorted, Throttle Body Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs Step-by-Step Diagnostic Guide My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 251

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 20, 2022

Description
Step-by-Step Diagnostic Guide
Possible Causes
How To Fix
Tech Notes ▶
Cost to Diagnose
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0122 2014 GMC Sierra Description

The Throttle Body Assembly contains a contact-less inductive throttle position sensing element that is managed by a customized integrated circuit. The throttle position sensor is mounted within the throttle body assembly and is not serviceable. The Engine Control Module (ECM) supplies the throttle body with a 5 V reference circuit, a low reference circuit. The asynchronous signal means communication is only going from the throttle body to the ECM. The throttle body cannot receive data from the ECM over the signal/serial data circuit. The throttle position sensor provides a signal voltage that changes relative to throttle blade angle. The throttle position sensor information is transmitted between the throttle body and the ECM on the signal/serial data circuit. The ECM decodes the serial data signal and is used as voltages for throttle position sensor 1 and 2. The Diagnostic Trouble Code (DTC) will be set when the ECM detects the throttle position sensor 1 signal voltage is less than 0.32 V for greater than 1 s.

OBDII Code P0122 2014 GMC Sierra - Throttle Position Sensor 1 Circuit Low Voltage - AutoCodes.com — P0122 2014 GMC Sierra Code - Throttle Position Sensor 1 Circuit Low Voltage

What does this mean?

What are the Possible Causes of the DTC P0122 2014 GMC Sierra?

Faulty Throttle Body Assembly
Throttle Body Assembly harness is open or shorted
Throttle Body Assembly circuit poor electrical connection
Faulty Engine Control Module (ECM)

How to Fix the DTC P0122 2014 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

User Submitted Video

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0122 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0122 2014 GMC Sierra code?

Need more information on how to fix the P0122 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0122 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.