P0122 2011 Nissan Sentra Code - Throttle Position Sensor/Switch 'A' Circuit Low Input
Quick Answer
The Throttle Pedal Position (TPP) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor 2, Throttle position sensor 2 harness is open or shorted, Throttle position sensor 2 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2011 Nissan Sentra indicates Throttle Position Sensor/Switch 'A' Circuit Low Input.
- Common causes
- Common causes include Faulty throttle position sensor 2, Throttle position sensor 2 harness is open or shorted, Throttle position sensor 2 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0122 2011 Nissan Sentra Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0122 2011 Nissan Sentra?
- Faulty throttle position sensor 2
- Throttle position sensor 2 harness is open or shorted
- Throttle position sensor 2 circuit poor electrical connection
How to Fix the DTC P0122 2011 Nissan Sentra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0122 2011 Nissan Sentra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0122 2011 Nissan Sentra code?
Need more information on how to fix the P0122 2011 Nissan Sentra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2011 Nissan Sentra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2011 Nissan Sentra Code
1. What are the common symptoms of OBDII code P0122 in a 2011 Nissan Sentra?
- Common symptoms include reduced engine power, poor acceleration, stalling, and difficulty maintaining a consistent speed.
2. What does the OBDII code P0122 indicate in a 2011 Nissan Sentra?
- The code indicates an issue with the Throttle Position Sensor/Switch 'A' Circuit, specifically a low input signal.
3. What are the possible causes of OBDII code P0122 in a 2011 Nissan Sentra?
- Possible causes include a faulty throttle position sensor, damaged wiring or connectors, a malfunctioning throttle body, or issues with the engine control module (ECM).
4. How can I diagnose the Throttle Position Sensor/Switch 'A' Circuit low input issue in my 2011 Nissan Sentra?
- You can use a scan tool to check for the P0122 code, visually inspect the throttle position sensor and its wiring, and perform voltage tests to determine the source of the low input signal.
5. Can I continue driving my 2011 Nissan Sentra with OBDII code P0122?
- It is not recommended to drive your vehicle with this code as it can lead to further engine performance issues and potentially cause safety concerns.
6. How can I repair OBDII code P0122 in my 2011 Nissan Sentra?
- Repair options include replacing the throttle position sensor, repairing or replacing damaged wiring, cleaning the throttle body, or reprogramming the engine control module.
7. Is it possible to reset the OBDII code P0122 in a 2011 Nissan Sentra without fixing the underlying issue?
- While you can clear the code temporarily, it is essential to address the root cause to prevent the issue from recurring.
8. Are there any DIY tips for troubleshooting OBDII code P0122 in a 2011 Nissan Sentra?
- DIY tips include checking for loose or damaged wiring, cleaning the throttle body, and ensuring proper connections to the throttle position sensor.
9. Can a dirty throttle body cause OBDII code P0122 in a 2011 Nissan Sentra?
- Yes, a dirty throttle body can disrupt the throttle position sensor's operation and lead to a low input signal, triggering the P0122 code.
10. How much does it typically cost to repair OBDII code P0122 in a 2011 Nissan Sentra?
- The cost of repair can vary depending on the cause of the issue, but it may range from $100 to $300 for parts and labor.
Discuss the causes and fixes for P0122 2011 Nissan Sentra OBDII Code
Code P0122 2011 Nissan Sentra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
