P0122 2010 Nissan Rogue Code - Throttle Position Sensor/Switch '1' Circuit Low Input
Quick Answer
The Throttle Pedal Position (TPP) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2010 Nissan Rogue indicates Throttle Position Sensor/Switch '1' Circuit Low Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0122 2010 Nissan Rogue Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0122 2010 Nissan Rogue?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0122 2010 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0122 2010 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0122 2010 Nissan Rogue code?
Need more information on how to fix the P0122 2010 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2010 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2010 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0122 in a 2010 Nissan Rogue?
- Common symptoms include a decrease in engine power, poor acceleration, rough idling, and potential issues with the vehicle's fuel economy.
2. What does the OBDII code P0122 'Throttle Position Sensor/Switch '1' Circuit Low Input' mean for a 2010 Nissan Rogue?
- This code indicates that there is a low input signal coming from the throttle position sensor, which can impact the engine's performance and efficiency.
3. What are the possible causes of OBDII code P0122 in a 2010 Nissan Rogue?
- The code P0122 can be triggered by a faulty throttle position sensor, damaged wiring or connectors related to the sensor, or issues with the sensor's circuit.
4. How can I diagnose the OBDII code P0122 in my 2010 Nissan Rogue?
- To diagnose the issue, you can use an OBDII scanner to read the code and then inspect the throttle position sensor, wiring, and connectors for any visible damage or wear.
5. Can I continue driving my 2010 Nissan Rogue with OBDII code P0122?
- It is not recommended to drive the vehicle with the P0122 code present, as it can lead to further damage and potential safety hazards due to the compromised throttle position sensor.
6. How can I repair OBDII code P0122 in my 2010 Nissan Rogue?
- Repair options include replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, and resetting the OBDII code with a scanner after the repairs are completed.
7. How much does it typically cost to fix OBDII code P0122 in a 2010 Nissan Rogue?
- The cost of fixing the P0122 code can vary depending on the specific issue causing it, but it may range from $100 to $300 for parts and labor.
8. Can a DIY enthusiast fix OBDII code P0122 in a 2010 Nissan Rogue?
- Depending on your skill level and access to tools, you may be able to replace the throttle position sensor or check the wiring yourself. However, if you are unsure, it's best to seek professional help.
9. How long does it take to repair OBDII code P0122 in a 2010 Nissan Rogue?
- The repair time can vary based on the exact cause of the issue, but a professional mechanic may typically take 1-2 hours to diagnose and fix the problem.
10. Will fixing OBDII code P0122 improve the performance of my 2010 Nissan Rogue?
- Yes, resolving the P0122 code by fixing the throttle position sensor issue should lead to improved engine performance, smoother acceleration, and better fuel efficiency in your Nissan Rogue.
Discuss the causes and fixes for P0122 2010 Nissan Rogue OBDII Code
Code P0122 2010 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
