P0122 2006 Scion xB Code - Throttle Position Sensor/Switch 'A' Circuit Low Input
Quick Answer
The Throttle Pedal Position (TPP) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2006 Scion xB indicates Throttle Position Sensor/Switch 'A' Circuit Low Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0122 2006 Scion xB Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0122 2006 Scion xB?
- Faulty throttle position sensor.
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
- ECM
How to Fix the DTC P0122 2006 Scion xB?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0122 2006 Scion xB code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0122 2006 Scion xB code?
Need more information on how to fix the P0122 2006 Scion xB code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2006 Scion xB code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2006 Scion xB Code
1. What are the common symptoms of OBDII code P0122 in a 2006 Scion xB?
The common symptoms of code P0122 in a 2006 Scion xB may include poor acceleration, stalling, rough idling, and decreased fuel efficiency.
2. What does the OBDII code P0122 'Throttle Position Sensor/Switch 'A' Circuit Low Input' mean for a 2006 Scion xB?
Code P0122 indicates that the Engine Control Module (ECM) has detected a low voltage signal from the throttle position sensor or switch in the 'A' circuit of the 2006 Scion xB.
3. What are possible causes of the P0122 code in a 2006 Scion xB?
Possible causes of code P0122 in a 2006 Scion xB include a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or issues with the ECM.
4. How can I diagnose the cause of OBDII code P0122 in my 2006 Scion xB?
To diagnose code P0122, you can use a scan tool to read the code and check the throttle position sensor's voltage output. Inspect the wiring and connectors for any damage and test the sensor's resistance.
5. Can I drive my 2006 Scion xB with OBDII code P0122?
It is not recommended to drive your 2006 Scion xB with code P0122 as it can cause performance issues and potentially lead to further damage. It's best to address the issue promptly.
6. How do I repair OBDII code P0122 in a 2006 Scion xB?
To repair code P0122, you may need to replace the throttle position sensor, repair any damaged wiring or connectors, or reprogram the ECM if necessary.
7. Is it safe to reset the OBDII code P0122 in my 2006 Scion xB without fixing the underlying issue?
Resetting the code without fixing the underlying issue will only temporarily clear the error code. It is important to address the root cause of the problem to prevent it from reoccurring.
8. Will a dirty throttle body cause OBDII code P0122 in a 2006 Scion xB?
While a dirty throttle body can cause performance issues, including erratic throttle response, it is not a direct cause of code P0122. However, it is still recommended to keep the throttle body clean for optimal performance.
9. Can a disconnected or loose throttle position sensor cause OBDII code P0122 in a 2006 Scion xB?
Yes, a disconnected or loose throttle position sensor can trigger code P0122 in a 2006 Scion xB. Ensure that the sensor is securely connected and functioning properly.
10. How can I prevent OBDII code P0122 from appearing in my 2006 Scion xB in the future?
Regular maintenance, including checking the throttle position sensor's condition and keeping the wiring connections secure, can help prevent code P0122 from appearing in your 2006 Scion xB.
Discuss the causes and fixes for P0122 2006 Scion xB OBDII Code
Code P0122 2006 Scion xB comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
