P0122 2006 Nissan Maxima Code - Throttle Position Sensor/Switch '1' Circuit Low Input
Quick Answer
The Throttle Pedal Position (TPP) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2006 Nissan Maxima indicates Throttle Position Sensor/Switch '1' Circuit Low Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0122 2006 Nissan Maxima Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0122 2006 Nissan Maxima?
- Faulty throttle position sensor.
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0122 2006 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0122 2006 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0122 2006 Nissan Maxima code?
Need more information on how to fix the P0122 2006 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2006 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2006 Nissan Maxima Code
1. What does OBDII code P0122 on a 2006 Nissan Maxima mean?
The code P0122 indicates a low input signal from the throttle position sensor/switch '1' circuit in the vehicle's engine control module.
2. What are common symptoms associated with OBDII code P0122 in a 2006 Nissan Maxima?
Common symptoms include reduced engine power, hesitation or jerking during acceleration, poor fuel efficiency, and the vehicle going into "limp mode."
3. What are the possible causes of OBDII code P0122 in a 2006 Nissan Maxima?
Potential causes of code P0122 include a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, a malfunctioning engine control module, or a problem with the throttle body.
4. How can I diagnose the issue causing OBDII code P0122 in my 2006 Nissan Maxima?
Diagnosis typically involves checking the throttle position sensor's voltage output, inspecting the sensor's wiring and connectors for damage, and testing the throttle body for proper operation.
5. Can I still drive my 2006 Nissan Maxima with OBDII code P0122?
It is not recommended to drive the vehicle with code P0122, as it can lead to further damage and potentially unsafe driving conditions. It is best to address the issue promptly.
6. What are some repair tips for resolving OBDII code P0122 in a 2006 Nissan Maxima?
Repair tips may include replacing the throttle position sensor, repairing any damaged wiring or connectors, resetting the engine control module, or cleaning the throttle body to address the issue.
7. Is it possible to reset OBDII code P0122 in a 2006 Nissan Maxima without fixing the underlying issue?
While clearing the code may temporarily turn off the check engine light, it will not fix the underlying problem causing the code to appear. The issue should be properly diagnosed and repaired.
8. How much does it typically cost to repair OBDII code P0122 in a 2006 Nissan Maxima?
The cost of repair can vary depending on the specific cause of the issue and whether you choose to address it yourself or take it to a mechanic. Costs may range from a few hundred to over a thousand dollars.
9. Can a DIY enthusiast fix OBDII code P0122 in a 2006 Nissan Maxima?
Depending on their skill level and access to tools, a DIY enthusiast may be able to address the issue themselves by following repair guides or consulting with experts. However, if unsure, it's best to seek professional help.
10. How urgent is it to address OBDII code P0122 in a 2006 Nissan Maxima?
It is important to address code P0122 promptly to prevent further damage to the vehicle and ensure safe driving conditions. Ignoring the issue can lead to more severe problems down the line.
Discuss the causes and fixes for P0122 2006 Nissan Maxima OBDII Code
Code P0122 2006 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
