P0122 2006 Nissan Altima Sedan Code - Throttle Position Sensor/Switch '1' Circuit Low Input
Quick Answer
The Throttle Pedal Position (TPP) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2006 Nissan Altima Sedan indicates Throttle Position Sensor/Switch '1' Circuit Low Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0122 2006 Nissan Altima Sedan Description
Idle position of the throttle valve is determined by the ECM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0122 2006 Nissan Altima Sedan?
- Faulty throttle position sensor.
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
- Faulty accelerator pedal position sensor
How to Fix the DTC P0122 2006 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0122 2006 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0122 2006 Nissan Altima Sedan code?
Need more information on how to fix the P0122 2006 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2006 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2006 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0122 on a 2006 Nissan Altima Sedan?
- Common symptoms include a lack of power, poor acceleration, rough idling, stalling, and potential issues with shifting gears.
2. What causes the Throttle Position Sensor/Switch '1' Circuit Low Input code on a 2006 Nissan Altima Sedan?
- This code is often triggered by a faulty throttle position sensor, damaged wiring or connectors in the throttle position sensor circuit, or a problem with the engine control module.
3. How can I diagnose the cause of the P0122 code on my 2006 Nissan Altima Sedan?
- You can diagnose the issue by checking the throttle position sensor's voltage output with a multimeter, inspecting the sensor's wiring and connectors for damage, and scanning the vehicle's computer for any related error codes.
4. Can a dirty throttle body cause the P0122 code on a 2006 Nissan Altima Sedan?
- Yes, a dirty throttle body can cause erratic readings from the throttle position sensor, leading to the P0122 code. It is recommended to clean the throttle body as part of the diagnostic process.
5. How can I repair the Throttle Position Sensor/Switch '1' Circuit Low Input code on my 2006 Nissan Altima Sedan?
- Repair options include replacing the throttle position sensor, repairing or replacing damaged wiring or connectors, and resetting the error code with an OBDII scanner after the repair.
6. Is it safe to continue driving my 2006 Nissan Altima Sedan with the P0122 code?
- It is not recommended to drive the vehicle with the P0122 code present, as it can lead to poor performance, decreased fuel efficiency, and potential safety hazards. It's best to address the issue promptly.
7. Can I reset the P0122 code on my 2006 Nissan Altima Sedan without fixing the underlying issue?
- While you can reset the code using an OBDII scanner, it will likely return if the underlying issue is not repaired. It's important to diagnose and fix the root cause of the problem.
8. How much does it typically cost to repair the Throttle Position Sensor/Switch '1' Circuit Low Input code on a 2006 Nissan Altima Sedan?
- The cost of repair can vary depending on the exact cause of the issue and whether you choose to do the repair yourself or take it to a mechanic. In general, the cost can range from $100 to $300 or more.
9. Can a DIY enthusiast fix the P0122 code on a 2006 Nissan Altima Sedan?
- Yes, if you have the necessary tools, knowledge, and experience, you may be able to diagnose and repair the P0122 code yourself. However, if you are unsure, it's best to consult a professional mechanic.
10. How often does the Throttle Position Sensor/Switch '1' Circuit Low Input code occur in 2006 Nissan Altima Sedans?
- The occurrence of this code can vary, but it is a relatively common issue in vehicles with throttle position sensor problems. Regular maintenance and monitoring can help prevent this code from appearing.
Discuss the causes and fixes for P0122 2006 Nissan Altima Sedan OBDII Code
Code P0122 2006 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
