P0122 2006 Jeep Liberty Code - Throttle Position Sensor/Accelerator Position Pedal Circuit Low Input
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2006 Jeep Liberty indicates Throttle Position Sensor/Accelerator Position Pedal Circuit Low Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0122 2006 Jeep Liberty Description
Idle position of the throttle valve is determined by the PCM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0122 2006 Jeep Liberty?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0122 2006 Jeep Liberty?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0122 2006 Jeep Liberty code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0122 2006 Jeep Liberty code?
Need more information on how to fix the P0122 2006 Jeep Liberty code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2006 Jeep Liberty code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2006 Jeep Liberty Code
1. What are the common symptoms of OBDII code P0122 in a 2006 Jeep Liberty?
The common symptoms include a lack of power when accelerating, rough idling, stalling, and possibly a decrease in fuel efficiency.
2. What does the OBDII code P0122 indicate in a 2006 Jeep Liberty?
The code P0122 indicates a low input signal from the throttle position sensor or accelerator pedal position sensor circuit in the vehicle.
3. What are the possible causes of OBDII code P0122 in a 2006 Jeep Liberty?
Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, a malfunctioning accelerator pedal position sensor, or a problem with the Engine Control Module (ECM).
4. How can I diagnose the OBDII code P0122 in my 2006 Jeep Liberty?
You can diagnose the code by using an OBDII scanner to retrieve the fault code, inspecting the throttle position sensor and accelerator pedal position sensor for any visible damage, and testing the sensor circuit for proper voltage and continuity.
5. Can I continue driving my 2006 Jeep Liberty with the OBDII code P0122?
It is not recommended to drive the vehicle with this code present, as it can lead to further damage and safety hazards due to potential issues with the throttle control system.
6. How can I repair OBDII code P0122 in my 2006 Jeep Liberty?
Repair options include replacing the throttle position sensor or accelerator pedal position sensor, repairing any damaged wiring or connectors in the sensor circuit, or reprogramming the ECM if necessary.
7. How much does it typically cost to fix OBDII code P0122 in a 2006 Jeep Liberty?
The cost of repair can vary depending on the specific cause of the code, but it may range from $100 to $300 for parts and labor.
8. Can I reset the OBDII code P0122 in my 2006 Jeep Liberty by disconnecting the battery?
While disconnecting the battery may clear the code temporarily, it is not a recommended long-term solution. It's best to diagnose and address the root cause of the code to prevent it from reoccurring.
9. How long does it take to repair OBDII code P0122 in a 2006 Jeep Liberty?
The repair time can vary depending on the exact cause of the code and the complexity of the repair. It may take anywhere from 1 to 3 hours for a professional mechanic to diagnose and fix the issue.
10. Is OBDII code P0122 a common issue in 2006 Jeep Liberty vehicles?
Yes, OBDII code P0122 related to the throttle position sensor or accelerator pedal position sensor circuit is a relatively common issue in 2006 Jeep Liberty vehicles, especially as they age and components wear out.
Discuss the causes and fixes for P0122 2006 Jeep Liberty OBDII Code
Code P0122 2006 Jeep Liberty comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
