P0122 2005 Jeep Liberty Code - Throttle Position Sensor/Accelerator Position Pedal Circuit Low Input
Quick Answer
The Throttle Position Sensor (TPS) responds to the accelerator pedal movement. Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0122 2005 Jeep Liberty indicates Throttle Position Sensor/Accelerator Position Pedal Circuit Low Input.
- Common causes
- Common causes include Faulty throttle position sensor, Throttle position sensor harness is open or shorted, Throttle position sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0122 2005 Jeep Liberty Description
Idle position of the throttle valve is determined by the PCM receiving the signal from the throttle position sensor. This sensor controls engine operation such as fuel cut. On the other hand, the Wide open and closed throttle position switch, which is built into the throttle position sensor unit, is not used for engine control.
What are the Possible Causes of the DTC P0122 2005 Jeep Liberty?
- Faulty throttle position sensor
- Throttle position sensor harness is open or shorted
- Throttle position sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0122 2005 Jeep Liberty?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0122 2005 Jeep Liberty code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0122 2005 Jeep Liberty code?
Need more information on how to fix the P0122 2005 Jeep Liberty code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0122 2005 Jeep Liberty code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0122 2005 Jeep Liberty Code
1. What are the common symptoms of OBDII code P0122 in a 2005 Jeep Liberty?
- Common symptoms include poor acceleration, lack of power, rough idling, stalling, and the vehicle going into "limp mode."
2. What does the OBDII code P0122 indicate in a 2005 Jeep Liberty?
- The code P0122 indicates a low input signal from the throttle position sensor or accelerator pedal position sensor circuit.
3. What are some possible causes of OBDII code P0122 in a 2005 Jeep Liberty?
- Possible causes include a faulty throttle position sensor, damaged wiring or connectors in the sensor circuit, a dirty throttle body, or a malfunctioning accelerator pedal position sensor.
4. How can I diagnose the cause of OBDII code P0122 in my 2005 Jeep Liberty?
- You can use a scan tool to read the code, visually inspect the throttle position sensor and its wiring, test the sensor's voltage with a multimeter, and perform a throttle body cleaning.
5. Can I drive my 2005 Jeep Liberty with the OBDII code P0122 present?
- It is not recommended to drive the vehicle with code P0122 as it can cause performance issues and potentially lead to further damage if left unresolved.
6. Is it possible to repair OBDII code P0122 in a 2005 Jeep Liberty myself?
- Depending on your level of experience and tools available, you may be able to replace the throttle position sensor or accelerator pedal position sensor yourself. However, it's recommended to seek professional help for an accurate diagnosis and repair.
7. How much does it typically cost to fix OBDII code P0122 in a 2005 Jeep Liberty?
- The cost of repair can vary depending on the exact cause of the code. Replacing a faulty throttle position sensor or accelerator pedal position sensor can range from $100 to $300, including parts and labor.
8. Will resetting the OBDII code P0122 in my 2005 Jeep Liberty make it go away permanently?
- Resetting the code may temporarily clear the warning light, but if the underlying issue causing the code is not fixed, it is likely to reappear upon driving the vehicle again.
9. How urgent is it to address OBDII code P0122 in a 2005 Jeep Liberty?
- It is recommended to address code P0122 promptly to prevent potential drivability issues and further damage to the vehicle's components.
10. Can a faulty throttle position sensor cause other problems besides triggering OBDII code P0122 in a 2005 Jeep Liberty?
- Yes, a faulty throttle position sensor can cause issues such as poor fuel economy, rough shifting, and overall drivability problems in addition to triggering the specific code P0122.
Discuss the causes and fixes for P0122 2005 Jeep Liberty OBDII Code
Code P0122 2005 Jeep Liberty comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
