AutoCodes – Ford – P0114 2008 Ford Fusion

P0114 2008 Ford Fusion Code - Intake Air Temperature Sensor 1 Intermittent Or Erratic

Quick Answer

The Intake Air Temperature (IAT) sensor is built into Mass Air Flow (MAF) sensor. Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: P0114 2008 Ford Fusion indicates Intake Air Temperature Sensor 1 Intermittent Or Erratic.
Common causes: Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 2,409

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Jul 13, 2020

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code P0114 2008 Ford Fusion Description

The Intake Air Temperature (IAT) sensor is built into Mass Air Flow (MAF) sensor. The sensor detects intake air temperature and transmits a signal to the Powertrain Control Module (PCM). The temperature sensing unit uses a thermistor which is sensitive to the change in temperature. The electrical resistance of the thermistor decreases in response to the temperature rise. The Intake Air Temperature signal is used as an input for various systems in the vehicle. It is used by the Powertrain Control Module to assist with the calculation of idle speed, fuel mixture, and spark advance. The Diagnostic Trouble Code (DTC) will set when the PCM detects an erratic signal from the Intake Air Temperature sensor during the system monitor test.

OBDII Code P0114 2008 Ford Fusion - Intake Air Temperature Sensor 1 Intermittent Or Erratic - AutoCodes.com — P0114 2008 Ford Fusion Code - Intake Air Temperature Sensor 1 Intermittent Or Erratic

What does this mean?

What are the Possible Causes of the DTC P0114 2008 Ford Fusion?

Dirty Air Filter
Faulty Intake Air Temperature (IAT) Sensor
Intake Air Temperature Sensor harness is open or shorted
Intake Air Temperature Sensor circuit poor electrical connection
Faulty Powertrain Control Module (PCM)

How to Fix the DTC P0114 2008 Ford Fusion?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

Before replacing the Mass Air Flow (MAF) sensor, try replacing the air filter and cleaning the Mass Air Flow sensor with Mass Air Flow sensor cleaner. Reset code and drive the vehicle. If the code comes back, it may be necessary to replace the Mass Air Flow sensor.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the P0114 2008 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the P0114 2008 Ford Fusion code?

Need more information on how to fix the P0114 2008 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P0114 2008 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P0114 2008 Ford Fusion Code

1. What are the common symptoms of OBDII code P0114 on a 2008 Ford Fusion?

The common symptoms of code P0114 include rough idling, decreased fuel efficiency, and potential stalling of the engine.

2. What could be causing the Intake Air Temperature Sensor 1 Intermittent Or Erratic error code on a 2008 Ford Fusion?

Potential causes of the P0114 code on a 2008 Ford Fusion could be a faulty intake air temperature sensor, damaged sensor wiring, or a poor electrical connection.

3. How can I diagnose the Intake Air Temperature Sensor 1 issue on my 2008 Ford Fusion?

You can diagnose the P0114 code by checking the intake air temperature sensor for any visible damage, testing the sensor's resistance, and inspecting the wiring and connections for any issues.

4. Can a dirty air filter trigger the P0114 error code on a 2008 Ford Fusion?

Yes, a dirty air filter can disrupt the airflow and affect the intake air temperature sensor readings, potentially leading to the P0114 code.

5. Is it safe to continue driving my 2008 Ford Fusion with the P0114 code present?

It is not recommended to drive your vehicle with the P0114 code active, as it can lead to poor engine performance and potential damage if left unresolved.

6. How can I reset the OBDII code P0114 on my 2008 Ford Fusion?

You can reset the P0114 code using an OBDII scanner or by disconnecting the car's battery for a few minutes to clear the error code.

7. Will replacing the intake air temperature sensor fix the P0114 error on a 2008 Ford Fusion?

In many cases, replacing the faulty intake air temperature sensor can resolve the P0114 error code on a 2008 Ford Fusion.

8. Are there any DIY repair tips for fixing the Intake Air Temperature Sensor 1 Intermittent Or Erratic issue on a 2008 Ford Fusion?

DIY repair tips for addressing the P0114 code include carefully inspecting the sensor and its connections, cleaning any debris, and ensuring a secure and proper installation of a new sensor if needed.

9. How much does it cost to repair the P0114 error code on a 2008 Ford Fusion at a mechanic?

The cost of repairing the P0114 code on a 2008 Ford Fusion at a mechanic can vary depending on the exact cause of the issue, but it typically ranges from $100 to $300, including parts and labor.

10. Can a bad intake air temperature sensor affect the overall performance of a 2008 Ford Fusion?

Yes, a malfunctioning intake air temperature sensor can negatively impact the engine's performance, fuel efficiency, and emissions control system on a 2008 Ford Fusion.