P0114 2007 Ford Fusion Code - Intake Air Temperature Sensor 1 Intermittent Or Erratic
Quick Answer
The Intake Air Temperature (IAT) sensor is built into Mass Air Flow (MAF) sensor. Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0114 2007 Ford Fusion indicates Intake Air Temperature Sensor 1 Intermittent Or Erratic.
- Common causes
- Common causes include Dirty Air Filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0114 2007 Ford Fusion Description
What are the Possible Causes of the DTC P0114 2007 Ford Fusion?
- Dirty Air Filter
- Faulty Intake Air Temperature (IAT) Sensor
- Intake Air Temperature Sensor harness is open or shorted
- Intake Air Temperature Sensor circuit poor electrical connection
- Faulty Powertrain Control Module (PCM)
How to Fix the DTC P0114 2007 Ford Fusion?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0114 2007 Ford Fusion code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0114 2007 Ford Fusion code?
Need more information on how to fix the P0114 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0114 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0114 2007 Ford Fusion Code
1. What are the common symptoms of OBDII code P0114 on a 2007 Ford Fusion?
- Common symptoms include poor engine performance, decreased fuel efficiency, rough idling, and potential stalling.
2. What does OBDII code P0114 indicate on a 2007 Ford Fusion?
- OBDII code P0114 indicates an issue with the Intake Air Temperature Sensor 1 being intermittent or erratic.
3. What are the possible causes of OBDII code P0114 on a 2007 Ford Fusion?
- Possible causes include a faulty intake air temperature sensor, wiring or connection issues, or a problem with the sensor's circuit.
4. How can I diagnose the Intake Air Temperature Sensor 1 on a 2007 Ford Fusion?
- You can use a multimeter to test the sensor's resistance, check the wiring for any damage or corrosion, and ensure the sensor is receiving proper voltage.
5. Is it safe to continue driving with OBDII code P0114 present on a 2007 Ford Fusion?
- It is not recommended to drive with this code present as it can lead to further engine issues and potential damage if left unresolved.
6. Can I repair OBDII code P0114 on a 2007 Ford Fusion myself?
- If you have experience working on cars, you may be able to replace the Intake Air Temperature Sensor 1 yourself. However, it's recommended to consult a professional for proper diagnosis and repair.
7. How much does it typically cost to repair OBDII code P0114 on a 2007 Ford Fusion?
- The cost of repairing this code can vary depending on the cause of the issue, but it generally ranges from $100 to $300 for parts and labor.
8. Are there any temporary fixes for OBDII code P0114 on a 2007 Ford Fusion?
- There are no reliable temporary fixes for this code, as it is best to address the root cause of the issue to prevent further complications.
9. How long does it take to repair OBDII code P0114 on a 2007 Ford Fusion?
- The repair time can vary depending on the exact cause of the issue and the availability of parts, but it typically takes 1-2 hours to replace the Intake Air Temperature Sensor 1.
10. Will resetting the OBDII code P0114 on a 2007 Ford Fusion make it go away permanently?
- Resetting the code may temporarily turn off the Check Engine Light, but if the underlying issue is not addressed, the code is likely to reappear.
Discuss the causes and fixes for P0114 2007 Ford Fusion OBDII Code
Code P0114 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
