P0113 2015 Toyota RAV4 Code - Intake Air Temperature Circuit High Input
Quick Answer
The Intake Air Temperature (IAT), mounted on the Mass Air Flow meter sub-assembly, monitors the intake air temperature. Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) Sensor (Part of the Mass Air Flow [MAF] Sensor), Intake Air Temperature sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2015 Toyota RAV4 indicates Intake Air Temperature Circuit High Input.
- Common causes
- Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) Sensor (Part of the Mass Air Flow [MAF] Sensor), Intake Air Temperature sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2015 Toyota RAV4 Description
The ECM monitors the sensor voltage and uses this value to calculate the intake air temperature. When the sensor output voltage deviates from the normal operating range, the ECM interprets this as a malfunction in the intake air temperature sensor circuit and stores a Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC P0113 2015 Toyota RAV4?
- Dirty air filter
- Faulty Intake Air Temperature (IAT) Sensor (Part of the Mass Air Flow [MAF] Sensor)
- Intake Air Temperature sensor harness is open or shorted
- Intake Air Temperature sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0113 2015 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2015 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2015 Toyota RAV4 code?
Need more information on how to fix the P0113 2015 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2015 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2015 Toyota RAV4 Code
1. What are the common symptoms of OBDII code P0113 in a 2015 Toyota RAV4?
Symptoms may include poor engine performance, rough idling, decreased fuel efficiency, and potential stalling.
2. What does the OBDII code P0113 "Intake Air Temperature Circuit High Input" mean in a 2015 Toyota RAV4?
It indicates that the Engine Control Module (ECM) has detected a high voltage signal from the intake air temperature sensor.
3. What are the possible causes of OBDII code P0113 in a 2015 Toyota RAV4?
Common causes include a faulty intake air temperature sensor, damaged wiring or connectors in the sensor circuit, or a problem with the ECM.
4. How can I diagnose the cause of OBDII code P0113 in my 2015 Toyota RAV4?
You can use a multimeter to test the intake air temperature sensor, inspect the sensor wiring and connectors for damage, and check for any corrosion in the connections.
5. Can a dirty air filter trigger OBDII code P0113 in a 2015 Toyota RAV4?
Yes, a dirty air filter can disrupt the intake air temperature readings, potentially leading to the high input signal detected by the ECM.
6. Are there any simple repairs I can try to fix OBDII code P0113 in my 2015 Toyota RAV4?
You can start by cleaning the intake air temperature sensor and its connections, replacing the air filter, and ensuring all wiring and connectors are secure.
7. Is it safe to continue driving my 2015 Toyota RAV4 with OBDII code P0113 active?
While the vehicle may still be driveable, it's recommended to address the issue promptly to prevent further damage to the engine and ensure optimal performance.
8. Can a malfunctioning thermostat cause OBDII code P0113 in a 2015 Toyota RAV4?
Yes, a faulty thermostat can impact the intake air temperature readings and contribute to triggering the high input signal detected by the ECM.
9. How much can I expect to pay for professional repairs related to OBDII code P0113 in my 2015 Toyota RAV4?
Costs can vary depending on the exact cause of the issue, but expect to pay anywhere from $100 to $300 for diagnosis and repairs at a professional auto repair shop.
10. Will resetting the OBDII system clear the P0113 code in my 2015 Toyota RAV4?
Resetting the system may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear once the ECM detects the problem again.
Discuss the causes and fixes for P0113 2015 Toyota RAV4 OBDII Code
Code P0113 2015 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
