P0113 2015 Chevrolet Silverado Code - Intake Air Temperature Circuit High Input
Quick Answer
The intake air temperature (IAT) sensor 1 is a variable resistor that measures the temperature of the air in the sensor bore. Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2015 Chevrolet Silverado indicates Intake Air Temperature Circuit High Input.
- Common causes
- Common causes include Dirty air filter, Faulty Intake Air Temperature (IAT) Sensor, Intake Air Temperature Sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2015 Chevrolet Silverado Description
What are the Possible Causes of the DTC P0113 2015 Chevrolet Silverado?
- Dirty air filter
- Faulty Intake Air Temperature (IAT) Sensor
- Intake Air Temperature Sensor harness is open or shorted
- Intake Air Temperature Sensor circuit poor electrical connection
- Faulty Engine Control Module (ECM)
How to Fix the DTC P0113 2015 Chevrolet Silverado?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2015 Chevrolet Silverado code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2015 Chevrolet Silverado code?
Need more information on how to fix the P0113 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2015 Chevrolet Silverado Code
What does the OBDII code P0113 mean for a 2015 Chevrolet Silverado?
P0113 indicates "Intake Air Temperature Circuit High Input," meaning the intake air temperature (IAT) sensor is detecting an abnormally high voltage, often caused by an open circuit or sensor failure.
What are the symptoms of code P0113 in a 2015 Chevrolet Silverado?
Symptoms may include poor fuel economy, reduced engine performance, hard starts, rough idling, or the check engine light illuminating.
What causes the P0113 code on a 2015 Chevrolet Silverado?
Common causes include a faulty IAT sensor, damaged wiring or connectors, an open circuit, or a disconnected sensor.
Can I drive my 2015 Chevrolet Silverado with a P0113 code?
While the vehicle may still be drivable, neglecting the issue can lead to decreased engine performance and efficiency. It's best to address the problem promptly.
How do I diagnose the P0113 code on a 2015 Chevrolet Silverado?
Inspect the IAT sensor and its wiring for damage, disconnections, or corrosion. Use a multimeter to check the sensor's resistance and verify voltage readings with a scan tool.
What does the intake air temperature sensor do in a 2015 Chevrolet Silverado?
The IAT sensor measures the temperature of incoming air and sends this data to the engine control module (ECM) to optimize air-fuel mixture and engine performance.
How do I fix code P0113 on a 2015 Chevrolet Silverado?
Repairs may include replacing the IAT sensor, repairing damaged wiring or connectors, or cleaning corrosion from electrical contacts.
Where is the IAT sensor located on a 2015 Chevrolet Silverado?
The IAT sensor is typically located near the intake manifold or air filter housing, integrated into the mass airflow (MAF) sensor in some models.
How much does it cost to fix a P0113 code on a 2015 Chevrolet Silverado?
Repair costs vary but typically range from $50 to $150 for parts and labor, depending on whether the sensor or wiring needs replacement.
Can a dirty air filter cause a P0113 code on a 2015 Chevrolet Silverado?
A dirty air filter alone is unlikely to cause P0113, but it can impact air flow, indirectly affecting sensor readings. Cleaning or replacing the filter may improve overall performance.
Discuss the causes and fixes for P0113 2015 Chevrolet Silverado OBDII Code
Code P0113 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
