P0113 2012 Nissan Rogue Code - Intake Air Temperature Sensor Circuit High
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2012 Nissan Rogue indicates Intake Air Temperature Sensor Circuit High.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2012 Nissan Rogue Description
What are the Possible Causes of the DTC P0113 2012 Nissan Rogue?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2012 Nissan Rogue?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2012 Nissan Rogue code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2012 Nissan Rogue code?
Need more information on how to fix the P0113 2012 Nissan Rogue code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2012 Nissan Rogue code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2012 Nissan Rogue Code
1. What are the common symptoms of OBDII code P0113 on a 2012 Nissan Rogue?
The common symptoms of OBDII code P0113 on a 2012 Nissan Rogue include poor fuel economy, rough idling, engine stalling, and a possible decrease in overall engine performance.
2. What does the OBDII code P0113 indicate on a 2012 Nissan Rogue?
OBDII code P0113 on a 2012 Nissan Rogue indicates an issue with the Intake Air Temperature (IAT) Sensor Circuit, specifically that the sensor is reporting a high voltage.
3. What are the possible causes of OBDII code P0113 on a 2012 Nissan Rogue?
The possible causes of OBDII code P0113 on a 2012 Nissan Rogue include a faulty Intake Air Temperature (IAT) sensor, damaged wiring or connectors in the sensor circuit, or issues with the Engine Control Module (ECM).
4. How can I diagnose the OBDII code P0113 on my 2012 Nissan Rogue?
To diagnose OBDII code P0113 on a 2012 Nissan Rogue, you can use a scan tool to check the sensor's reading, inspect the sensor and its wiring for any visible damage, and test the sensor's resistance to determine if it is functioning properly.
5. Can I continue to drive my 2012 Nissan Rogue with OBDII code P0113?
It is not recommended to continue driving your 2012 Nissan Rogue with OBDII code P0113, as it can lead to further engine performance issues and potentially cause long-term damage. It is best to address the underlying problem as soon as possible.
6. How can I repair OBDII code P0113 on my 2012 Nissan Rogue?
To repair OBDII code P0113 on a 2012 Nissan Rogue, you may need to replace the Intake Air Temperature (IAT) sensor, repair any damaged wiring or connectors in the sensor circuit, or reset the Engine Control Module (ECM) to clear the code.
7. Is it possible to reset OBDII code P0113 on a 2012 Nissan Rogue without fixing the underlying issue?
While you can reset OBDII code P0113 on a 2012 Nissan Rogue using a scan tool, the code is likely to reappear if the underlying issue with the Intake Air Temperature (IAT) sensor circuit is not fixed.
8. Can a dirty air filter cause OBDII code P0113 on a 2012 Nissan Rogue?
A dirty air filter is unlikely to directly cause OBDII code P0113 on a 2012 Nissan Rogue. However, a clogged air filter can affect the overall engine performance and fuel efficiency, so it is still important to replace it regularly.
9. How much does it cost to repair OBDII code P0113 on a 2012 Nissan Rogue?
The cost to repair OBDII code P0113 on a 2012 Nissan Rogue can vary depending on the exact cause of the issue. In general, replacing the Intake Air Temperature (IAT) sensor or repairing the wiring may cost anywhere from $100 to $300 at a repair shop.
10. Can a DIY enthusiast fix OBDII code P0113 on a 2012 Nissan Rogue at home?
A DIY enthusiast with the necessary tools and knowledge of automotive repairs may be able to fix OBDII code P0113 on a 2012 Nissan Rogue at home by replacing the Intake Air Temperature (IAT) sensor or repairing the sensor circuit themselves.
Discuss the causes and fixes for P0113 2012 Nissan Rogue OBDII Code
Code P0113 2012 Nissan Rogue comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
