P0113 2010 Honda Accord Code - Intake Air Temperature Sensor Circuit High Voltage
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2010 Honda Accord indicates Intake Air Temperature Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2010 Honda Accord Description
What are the Possible Causes of the DTC P0113 2010 Honda Accord?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2010 Honda Accord?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2010 Honda Accord code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2010 Honda Accord code?
Need more information on how to fix the P0113 2010 Honda Accord code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2010 Honda Accord code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2010 Honda Accord Code
1. What does the OBDII code P0113 on a 2010 Honda Accord mean?
The code P0113 indicates a problem with the Intake Air Temperature (IAT) sensor circuit, specifically a high voltage condition.
2. What are common symptoms of a P0113 code on a 2010 Honda Accord?
Common symptoms include poor engine performance, rough idle, stalling, decreased fuel efficiency, and the Check Engine light illuminating on the dashboard.
3. What causes the P0113 code to trigger on a 2010 Honda Accord?
The P0113 code is often triggered by a faulty or damaged Intake Air Temperature (IAT) sensor, loose or corroded electrical connections, or issues with the sensor circuit wiring.
4. How can I diagnose the cause of a P0113 code on my 2010 Honda Accord?
You can diagnose the P0113 code by visually inspecting the IAT sensor and its wiring for damage, testing the sensor's resistance with a multimeter, and checking for voltage at the sensor connector.
5. What are some possible repair options for a P0113 code on a 2010 Honda Accord?
Repair options include replacing the Intake Air Temperature (IAT) sensor, repairing or replacing damaged wiring or connectors, and clearing the trouble code with an OBDII scanner.
6. Can a P0113 code on a 2010 Honda Accord cause any long-term damage if left unaddressed?
While driving with a P0113 code may not cause immediate damage, it can lead to poor engine performance, reduced fuel efficiency, and potential long-term issues if not resolved promptly.
7. Is it safe to drive my 2010 Honda Accord with a P0113 code present?
It is generally not recommended to drive with a P0113 code present, as it can affect your vehicle's performance and fuel efficiency. It's best to address the issue as soon as possible.
8. How much does it typically cost to repair a P0113 code on a 2010 Honda Accord?
The cost of repairing a P0113 code can vary depending on the root cause of the issue. Replacing the Intake Air Temperature (IAT) sensor or repairing wiring may cost anywhere from $50 to $200, including parts and labor.
9. Can I reset the P0113 code on my 2010 Honda Accord without fixing the underlying issue?
While you can clear the trouble code with an OBDII scanner, it is essential to address the underlying problem causing the P0113 code to prevent it from reoccurring and potentially causing further issues.
10. How can I prevent the P0113 code from reappearing on my 2010 Honda Accord in the future?
Regularly inspecting and maintaining the Intake Air Temperature (IAT) sensor, ensuring proper electrical connections, and addressing any issues promptly can help prevent the recurrence of the P0113 code on your Honda Accord.
Discuss the causes and fixes for P0113 2010 Honda Accord OBDII Code
Code P0113 2010 Honda Accord comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
