P0113 2008 Nissan Versa Code - Intake Air Temperature Sensor Circuit High
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2008 Nissan Versa indicates Intake Air Temperature Sensor Circuit High.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2008 Nissan Versa Description
What are the Possible Causes of the DTC P0113 2008 Nissan Versa?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2008 Nissan Versa?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2008 Nissan Versa code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2008 Nissan Versa code?
Need more information on how to fix the P0113 2008 Nissan Versa code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2008 Nissan Versa code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2008 Nissan Versa Code
1. What are the common symptoms of OBDII code P0113 on a 2008 Nissan Versa?
- Common symptoms include poor engine performance, rough idling, stalling, and reduced fuel efficiency.
2. What does the OBDII code P0113 on a 2008 Nissan Versa mean?
- This code indicates that the Intake Air Temperature (IAT) sensor circuit is reading a high voltage, which may lead to inaccurate temperature readings.
3. What are the potential causes of OBDII code P0113 on a 2008 Nissan Versa?
- The most common causes include a faulty IAT sensor, damaged sensor wiring, poor electrical connections, or issues with the engine control module (ECM).
4. How can I diagnose the Intake Air Temperature sensor circuit high issue on a 2008 Nissan Versa?
- You can use a multimeter to test the resistance of the IAT sensor, inspect the sensor wiring for damage, and check the electrical connections for any corrosion or looseness.
5. Can I drive my 2008 Nissan Versa with OBDII code P0113?
- It is not recommended to drive your vehicle with this code as it can lead to further engine problems and reduced performance. It's best to address the issue promptly.
6. How can I repair OBDII code P0113 on my 2008 Nissan Versa?
- Repair options include replacing the faulty IAT sensor, repairing damaged wiring, cleaning electrical connections, or resetting the ECM to clear the code.
7. Will resetting the ECM clear the OBDII code P0113 on a 2008 Nissan Versa?
- Resetting the ECM may temporarily clear the code, but if the underlying issue is not fixed, the code is likely to reappear after a short period of driving.
8. Can a dirty air filter trigger OBDII code P0113 on a 2008 Nissan Versa?
- While a dirty air filter can affect engine performance, it is not a direct cause of P0113. However, it's good practice to ensure the air filter is clean and properly installed.
9. How much does it cost to fix OBDII code P0113 on a 2008 Nissan Versa?
- The cost of repairs can vary depending on the exact cause of the issue. Replacing the IAT sensor typically costs between $50 to $150, while professional labor may add to the total cost.
10. Can I replace the Intake Air Temperature sensor on a 2008 Nissan Versa myself?
- If you have some experience with automotive repairs and the necessary tools, you may be able to replace the IAT sensor yourself. However, if you're unsure, it's best to consult a professional mechanic.
Discuss the causes and fixes for P0113 2008 Nissan Versa OBDII Code
-
I cleaned the air mass sensor,replaced the air filter and still have the same code p0113/p0102...is it time to replace the sensor
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
