P0113 2008 Nissan Maxima Code - Intake Air Temperature Sensor Circuit High
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2008 Nissan Maxima indicates Intake Air Temperature Sensor Circuit High.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2008 Nissan Maxima Description
What are the Possible Causes of the DTC P0113 2008 Nissan Maxima?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2008 Nissan Maxima?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2008 Nissan Maxima code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2008 Nissan Maxima code?
Need more information on how to fix the P0113 2008 Nissan Maxima code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2008 Nissan Maxima code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2008 Nissan Maxima Code
1. What does OBDII code P0113 mean for my 2008 Nissan Maxima?
This code indicates a high voltage reading from the Intake Air Temperature (IAT) sensor circuit.
2. What are the common symptoms of a P0113 code in a 2008 Nissan Maxima?
Common symptoms include poor fuel economy, rough idling, engine stalling, and a possible decrease in engine performance.
3. What are the possible causes of a P0113 code in a 2008 Nissan Maxima?
The main causes can be a faulty IAT sensor, damaged wiring or connectors in the sensor circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the root cause of a P0113 code in my 2008 Nissan Maxima?
To diagnose this code, you can use a multimeter to test the IAT sensor's resistance, check the sensor's wiring for any damage, and inspect the ECM for any signs of malfunction.
5. Can a dirty air filter trigger a P0113 code in a 2008 Nissan Maxima?
Yes, a dirty air filter can affect the IAT sensor readings, leading to a potential trigger of the P0113 code.
6. Is it safe to continue driving my 2008 Nissan Maxima with a P0113 code?
It is not recommended to drive with a P0113 code as it can affect the engine's performance and fuel efficiency. It's best to address the issue promptly.
7. How can I reset the P0113 code in my 2008 Nissan Maxima after making repairs?
You can reset the code using an OBDII scanner or by disconnecting the car's battery for a few minutes to clear the ECM's memory.
8. What are some repair tips for fixing a P0113 code in a 2008 Nissan Maxima?
Ensure the IAT sensor is clean and functioning properly, check for any damaged wires or connectors, and inspect the ECM for any signs of damage.
9. Does a P0113 code affect emissions in a 2008 Nissan Maxima?
Yes, a P0113 code can lead to increased emissions due to improper air intake temperature readings affecting the engine's performance.
10. Can a P0113 code be intermittent in a 2008 Nissan Maxima?
Yes, the P0113 code can sometimes be intermittent, especially if the issue is related to loose wiring or a sporadically malfunctioning sensor.
Discuss the causes and fixes for P0113 2008 Nissan Maxima OBDII Code
Code P0113 2008 Nissan Maxima comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
