P0113 2008 Nissan Altima Sedan Code - Intake Air Temperature Sensor Circuit High
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2008 Nissan Altima Sedan indicates Intake Air Temperature Sensor Circuit High.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2008 Nissan Altima Sedan Description
What are the Possible Causes of the DTC P0113 2008 Nissan Altima Sedan?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2008 Nissan Altima Sedan?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2008 Nissan Altima Sedan code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2008 Nissan Altima Sedan code?
Need more information on how to fix the P0113 2008 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2008 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2008 Nissan Altima Sedan Code
1. What are the common symptoms of OBDII code P0113 in a 2008 Nissan Altima Sedan?
The common symptoms of OBDII code P0113 in a 2008 Nissan Altima Sedan include poor fuel economy, rough idling, and potential engine stalling.
2. What does the OBDII code P0113 indicate in a 2008 Nissan Altima Sedan?
OBDII code P0113 in a 2008 Nissan Altima Sedan indicates an issue with the Intake Air Temperature (IAT) Sensor Circuit registering a high voltage.
3. What are the possible causes of OBDII code P0113 in a 2008 Nissan Altima Sedan?
Possible causes of OBDII code P0113 in a 2008 Nissan Altima Sedan include a faulty IAT sensor, damaged wiring or connector in the sensor circuit, or a problem with the engine control module (ECM).
4. How can I diagnose the Intake Air Temperature Sensor Circuit High issue in my 2008 Nissan Altima Sedan?
To diagnose the Intake Air Temperature Sensor Circuit High issue in a 2008 Nissan Altima Sedan, you can use a multimeter to test the IAT sensor's resistance, check the wiring and connectors for any damage, and scan the vehicle's ECM for trouble codes.
5. Can I drive my 2008 Nissan Altima Sedan with OBDII code P0113?
It's not recommended to drive your 2008 Nissan Altima Sedan with OBDII code P0113 for an extended period, as it can lead to poor engine performance and potential damage. It's best to address the issue promptly.
6. How can I repair the Intake Air Temperature Sensor Circuit High problem in my 2008 Nissan Altima Sedan?
To repair the Intake Air Temperature Sensor Circuit High problem in a 2008 Nissan Altima Sedan, you may need to replace the faulty IAT sensor, repair any damaged wiring or connectors, or reprogram the ECM if necessary.
7. Can a dirty air filter trigger OBDII code P0113 in a 2008 Nissan Altima Sedan?
A dirty air filter may not directly trigger OBDII code P0113 in a 2008 Nissan Altima Sedan, but it can affect the overall engine performance and efficiency, leading to related issues.
8. How much does it cost to fix OBDII code P0113 in a 2008 Nissan Altima Sedan?
The cost to fix OBDII code P0113 in a 2008 Nissan Altima Sedan can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
9. Will resetting the OBDII code P0113 in my 2008 Nissan Altima Sedan make it go away permanently?
Resetting the OBDII code P0113 in a 2008 Nissan Altima Sedan may clear the code temporarily, but if the underlying issue is not addressed, the code is likely to reappear during subsequent driving cycles.
10. Is it necessary to visit a mechanic for OBDII code P0113 diagnosis and repair in a 2008 Nissan Altima Sedan?
While some DIY enthusiasts may diagnose and repair OBDII code P0113 in a 2008 Nissan Altima Sedan themselves, visiting a mechanic is recommended for accurate diagnosis and proper repair, especially if you're not experienced with automotive repairs.
Discuss the causes and fixes for P0113 2008 Nissan Altima Sedan OBDII Code
Code P0113 2008 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
