P0113 2006 Toyota Camry Code - Intake Air Temperature Circuit High Input
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2006 Toyota Camry indicates Intake Air Temperature Circuit High Input.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2006 Toyota Camry Description
What are the Possible Causes of the DTC P0113 2006 Toyota Camry?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2006 Toyota Camry?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2006 Toyota Camry code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2006 Toyota Camry code?
Need more information on how to fix the P0113 2006 Toyota Camry code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2006 Toyota Camry code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2006 Toyota Camry Code
1. What are the common symptoms of OBDII code P0113 on a 2006 Toyota Camry?
- Common symptoms include poor fuel economy, rough idling, engine stalling, and a possible decrease in overall engine performance.
2. What does the OBDII code P0113 "Intake Air Temperature Circuit High Input" mean for a 2006 Toyota Camry?
- This code indicates that the Engine Control Module (ECM) has detected a higher than normal voltage from the intake air temperature sensor.
3. What are some possible causes of OBDII code P0113 on a 2006 Toyota Camry?
- Potential causes include a faulty intake air temperature sensor, damaged wiring or connectors in the sensor circuit, or a problem with the ECM itself.
4. How can I diagnose the OBDII code P0113 on my 2006 Toyota Camry?
- Diagnosing this code typically involves checking the intake air temperature sensor for proper operation, inspecting the sensor wiring and connectors for damage, and using a multimeter to test the sensor's voltage.
5. Can driving with the OBDII code P0113 on a 2006 Toyota Camry cause further damage?
- Continuing to drive with this code may lead to decreased fuel efficiency, potential engine performance issues, and could potentially cause further damage if left unresolved for an extended period.
6. How can I repair the OBDII code P0113 on my 2006 Toyota Camry?
- Repairing this code usually involves replacing the intake air temperature sensor if it is found to be faulty, repairing any damaged wiring or connectors, and clearing the code from the ECM memory.
7. Are there any DIY tips for fixing the OBDII code P0113 on a 2006 Toyota Camry?
- DIY tips include checking the sensor connections for any loose or corroded terminals, ensuring the sensor is clean and free of debris, and following a repair manual or online guide for step-by-step instructions.
8. Is it safe to continue driving my 2006 Toyota Camry with the OBDII code P0113?
- It is generally not recommended to drive the vehicle with this code present, as it can lead to potential performance issues and decreased fuel efficiency. It's best to address the issue promptly.
9. How much does it typically cost to repair the OBDII code P0113 on a 2006 Toyota Camry?
- The cost of repairing this code can vary depending on the root cause of the issue, but it may range from $100 to $300 for parts and labor at a repair shop.
10. Will resetting the OBDII code P0113 on my 2006 Toyota Camry make it go away permanently?
- Resetting the code may temporarily clear it from the ECM memory, but if the root cause of the issue is not addressed, the code is likely to reappear. It's important to diagnose and repair the underlying problem to prevent recurrence.
Discuss the causes and fixes for P0113 2006 Toyota Camry OBDII Code
Code P0113 2006 Toyota Camry comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
