P0113 2006 Infiniti G35 Code - Intake Air Temperature Sensor Circuit High
Quick Answer
The Intake Air Temperature (IAT) sensor is built into mass air flow sensor or in some vehicles mounted to the air filter duct housing. Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P0113 2006 Infiniti G35 indicates Intake Air Temperature Sensor Circuit High.
- Common causes
- Common causes include Faulty Intake Air Temperature (IAT) sensor, Dirty air filter, Intake Air Temperature (IAT) sensor harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code P0113 2006 Infiniti G35 Description
What are the Possible Causes of the DTC P0113 2006 Infiniti G35?
- Faulty Intake Air Temperature (IAT) sensor
- Dirty air filter
- Intake Air Temperature (IAT) sensor harness is open or shorted
- Intake Air Temperature (IAT) sensor circuit poor electrical connection
How to Fix the DTC P0113 2006 Infiniti G35?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the P0113 2006 Infiniti G35 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the P0113 2006 Infiniti G35 code?
Need more information on how to fix the P0113 2006 Infiniti G35 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P0113 2006 Infiniti G35 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P0113 2006 Infiniti G35 Code
1. What are the common symptoms of OBDII code P0113 on a 2006 Infiniti G35?
The common symptoms of code P0113 on a 2006 Infiniti G35 include rough idling, engine stalling, poor fuel efficiency, and a possible decrease in engine performance.
2. What does the OBDII code P0113 mean for a 2006 Infiniti G35?
Code P0113 indicates a problem with the Intake Air Temperature (IAT) Sensor Circuit, specifically that the sensor is reading a high voltage signal.
3. What are the possible causes of OBDII code P0113 on a 2006 Infiniti G35?
Possible causes of code P0113 on a 2006 Infiniti G35 include a faulty IAT sensor, damaged wiring or connectors in the sensor circuit, or issues with the engine control module (ECM).
4. How can I diagnose the cause of OBDII code P0113 on my 2006 Infiniti G35?
To diagnose code P0113, you can start by visually inspecting the IAT sensor and its wiring for any visible damage. You can also use a multimeter to test the sensor's resistance and voltage output.
5. Can I continue driving my 2006 Infiniti G35 with OBDII code P0113?
It is not recommended to continue driving your 2006 Infiniti G35 with code P0113, as it can lead to potential engine performance issues and decreased fuel efficiency.
6. How can I repair OBDII code P0113 on my 2006 Infiniti G35?
To repair code P0113, you may need to replace the faulty IAT sensor, repair any damaged wiring or connectors, or reset the ECM to clear the code.
7. Is it possible to reset OBDII code P0113 on a 2006 Infiniti G35 without fixing the underlying issue?
While you can clear the code temporarily by resetting the ECM, it is important to address the underlying issue causing code P0113 to prevent it from reoccurring.
8. Will a faulty IAT sensor cause other problems in my 2006 Infiniti G35 besides triggering code P0113?
Yes, a faulty IAT sensor can cause other issues in your 2006 Infiniti G35 such as incorrect air-fuel mixture, poor engine performance, and potential damage to engine components.
9. How much does it cost to replace the IAT sensor on a 2006 Infiniti G35?
The cost of replacing the IAT sensor on a 2006 Infiniti G35 can vary depending on the brand of the sensor and labor costs, but it typically ranges from $50 to $150.
10. Can a DIY enthusiast replace the IAT sensor in a 2006 Infiniti G35?
Replacing the IAT sensor in a 2006 Infiniti G35 is a relatively straightforward task that can be done by a DIY enthusiast with basic automotive knowledge and tools.
Discuss the causes and fixes for P0113 2006 Infiniti G35 OBDII Code
Code P0113 2006 Infiniti G35 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
